R B. Consumable Materials
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R C. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 25-23-47-000-004 R R 25-23-47-000-009 R R 25-23-47-400-004 R R 25-23-47-400-009 R R 52-22-00-010-001 R Removal of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231 Removal of the Door Frame Linings of the RH FWD Emergency Exit Door, zone 232 Installation of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231 Installation of the Door Frame Linings of the RH FWD Emergency Exit Door, zone 232 Opening of the Emergency Exit Doors from the Passenger Compartment
R EFF : 301-399, 53-21-00Page 608 May 01/04
CES -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 52-22-00-410-001 Closing of the Emergency Exit Doors from the
R Passenger Compartment
R SRM 511100 P.Block 001 (for corrective action)
R SRM 512200 P.Block 001 (for corrective action)
R 53-21-00-991-021 Fig. 602
R 3. Job Set-up__________
R Subtask 53-21-00-010-060
R A. Get Access
R (1) Put an access platform in position at the zone 231(232).
R (2) Open the forward emergency exit door 833 (843), (Ref. TASK 52-22-00-
R 010-001).
R (3) Remove the door frame linings (Ref. TASK 25-23-47-000-004) (Ref. TASK
R 25-23-47-000-009).
R Subtask 53-21-00-110-051
R B. Cleaning of the Structure
R WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______
R MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.
R OBEY THE MANUFACTURERS INSTRUCTIONS.
R PUT ON PROTECTIVE CLOTHING.
R DO NOT GET THEM IN YOUR MOUTH.
R DO NOT SMOKE.
R DO NOT BREATHE THE GAS.
R THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.
R GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______
R MATERIAL/S.
R USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
R (1) Clean the inspection area with a CLEANING AGENTS (Material No. 11-
R 004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-
R 003), if necessary.
CES CES
R 4. Procedure_________
R Subtask 53-21-00-220-051
R A. Inspection
R (Ref. Fig. 602/TASK 53-21-00-991-021)
R (1) Do a detailed inspection of the structure of the door stop fittings.
R (2) Make sure that there is no:
R (a) Corrosion damage:
R - If you find corrosion damage, refer to the Structural Repair
R Manual (Ref. SRM 512200 P.Block 001) for types of corrosion,
R inspection, removal and corrosion protection.
R (b) Other damage (cracks, scratches, stress, marks, dents,
R bumps,...):
R - If you find other damage, refer to the Structural Repair Manual
R (Ref. SRM 511100 P.Block 001) for damage classification and
R corrective action.
R 5. Close-up________
R Subtask 53-21-00-410-059
R A. Close Access
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Install the door frame linings (Ref. TASK 25-23-47-400-004)
R (Ref. TASK 25-23-47-400-009).
R (3) Close the forward emergency exit 833 (843), (Ref. TASK 52-22-00-410-
R 001).
R (4) Remove the access platform(s).
R Door Stop Fitting, FR35.1 and FR35.2A, Left and Right Sides R Figure 602/TASK 53-21-00-991-021 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(134)
