R R  Escape-Slide Stowage Compartment Figure 603/TASK 53-21-00-991-022  
R  EFF :  301-399,  53-21-00 Page 615 May 01/04 
 CES 
R (3) Remove the masking paper or masking tape.
R  5. Close-up________  
R  Subtask 53-21-00-410-060  
R  A. Close Access  
R  (1) Make sure that the work area is clean and clear of tool(s) and other  
R  items.  
R  (2) Install the escape slide stowage compartment at door 2 and 3  
R  (Ref. TASK 25-62-47-400-001).  
R  (3) Close the forward cargo compartment door 825 (Ref. TASK 52-30-00-860- 
R  004).  
R  (4) Remove the access platform(s). 
CES
R TASK 53-21-00-200-021
R  Detailed Inspection of Forward Emergency Exit Cutout Underneath the  
R  Scuff-plate, LH/RH  
R  1. Reason for the Job__________________  
R  Refer to the MPD TASK: 532119-01  
R  2. Job Set-up Information______________________  
R  A. Fixtures, Tools, Test and Support Equipment  
R  ------------------------------------------------------------------------------- 
R  REFERENCE QTY DESIGNATION  
R  ------------------------------------------------------------------------------- 
R  No specific access platform 3.2 m (10 ft. 6 in.)  
R  B. Consumable Materials  
R  ------------------------------------------------------------------------------- 
R  REFERENCE DESIGNATION  
R  ------------------------------------------------------------------------------- 
R  Material No. 11-004 USA MIL-T-81533  
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)  
R  (Ref. 20-31-00)  
R  Material No. 19-003 USA AMS 3819  
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00)  
R  C. Referenced Information  
R  ------------------------------------------------------------------------------- 
R  REFERENCE DESIGNATION  
R  ------------------------------------------------------------------------------- 
R  52-22-00-010-002 Opening of the Emergency Exit Doors from the Outside  
R  52-22-00-410-002 Closing of the Emergency Exit Doors from the Outside  
R  53-25-41-000-001 Removal of the FWD Emergency-Exit Scuff-Plate  
R  53-25-41-400-001 Installation of the FWD Emergency-Exit Scuff-Plate  
R  SRM 511100 P.Block 001 (for corrective action)  
R  SRM 512200 P.Block 001 (for corrective action)  
R  53-21-00-991-023 Fig. 604 
CES
R 3. Job Set-up
__________
R  Subtask 53-21-00-010-062  
R  A. Get Access  
R  (1) Put an access platform in position at the zone 231 (232).  
R  (2) Open the forward emergency exit door 833 (843) (Ref. TASK 52-22-00- 
R  010-002).  
R  (3) Remove the scuff-plate below the forward emergency exit (Ref. TASK  
R  53-25-41-000-001) (left and right sides).  
R  Subtask 53-21-00-110-053  
R  B. Cleaning of the Structure  
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______  
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR.  
R  OBEY THE MANUFACTURERS INSTRUCTIONS.  
R  PUT ON PROTECTIVE CLOTHING.  
R  DO NOT GET THEM IN YOUR MOUTH.  
R  DO NOT SMOKE.  
R  DO NOT BREATHE THE GAS.  
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT.  
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.  
R  WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______  
R  MATERIAL/S.  
R  USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.  
R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004)  
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUSELAGE 机身1(136)