• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:44来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R R  (1) Do a detailed inspection of the external portion of the cockpit windshield frame below the retainers.
 (2) Make sure that there is no:
R R  (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
R R R  (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
 5. Close-up________
 Subtask 53-11-00-420-053
 A. Close Access 
R R  (1) Make sure that the work area is clean and clear of tool(s) and other items. 
R R (2) Remove the access platform(s). 

 CES


R R  Cockpit Windshield Frame Figure 644/TASK 53-11-00-991-053
 EFF :  ALL  53-11-00 Page A673 Aug 01/03
 CES 

 

 TASK 53-11-00-210-043
R  Detailed Inspection of Cockpit Windshield, External Visible Portion of Retainers
 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 531178-01


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 4.5 m (14 ft. 9 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) R 53-11-00-991-054 Fig. 645


 3. Job Set-up__________
 Subtask 53-11-00-941-083
 A. Get Access 
R  (1) Put an access platform at the zone 210.
 Subtask 53-11-00-110-091
 B. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R R R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
 4. Procedure_________
 Subtask 53-11-00-220-057
R  A. Inspection (Ref. Fig. 645/TASK 53-11-00-991-054) 
R R  (1) Do a detailed visual inspection of the external portion that you can see of the cockpit windshield retainers.
 (2) Make sure that there is no:
R R  (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.

 CES


R  Cockpit Windshield Retainers Figure 645/TASK 53-11-00-991-054
 EFF :  ALL  53-11-00 Page A676 Aug 01/03
 CES 

 

R R R  (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
 5. Close-up________
 Subtask 53-11-00-942-091
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Remove the access platform(s).


 TASK 53-11-00-210-044


 Detailed Inspection of Forward Passenger/Crew Door Cutout, Underneath the Scuff-Plate, LH/RH
 1. Reason for the Job__________________
 Refer to the MPD TASK: 531180-01
 2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R R R  -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUSELAGE 机身1(72)