(2)
Open the FWD passenger/crew door 831 (841) (Ref. TASK 52-10-00-010-001).
(3) Remove the collector grid (Ref. TASK 53-19-41-000-001).
Subtask 53-19-00-110-050
B. Cleaning of the Inspection Area
(1) Clean the inspection area with a sponge and a solution of water and soap and dry with a MISCELLANEOUS (Material No. 19-003).
R EFF : 001-049, 054-099, 101-149, 151-199, 53-19-00Page 602 201-299, 301-399, 401-499, Aug 01/05
CES CES
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
4. Procedure_________
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Post SB 53-1143 For A/C 001-003,
Subtask 53-19-00-210-050
A. Inspection (Ref. Fig. 601/TASK 53-19-00-991-001)
(1) Do a detailed inspection of the cockpit grid collector assy between lavatory A and galley 1 with a flashlight.
(2) Make sure that there is no unwanted material (dirt, water, debris): - If there is unwanted material (dirt, water, debris), clean the area following the procedure given above para. 3.B.
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
5. Close-up________
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Post SB 53-1143 For A/C 001-003,
Subtask 53-19-00-410-050
A. Close Access
(1) Install the collector grid (Ref. TASK 53-19-41-400-001).
(2) Make sure that the work area is clean and clear of tool(s) and other items.
(3) Close the FWD passenger/crew door 831 (841) (Ref. TASK 52-10-00-410-001).
(4) Remove the access platform(s).
Cockpit Grid Collector Assy Figure 601/TASK 53-19-00-991-001
R EFF : 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499, 53-19-00 Page 604 Aug 01/05
CES
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
TASK 53-19-00-710-001
Operational Check of the Cockpit Drainage Pipe
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531900-02
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific flashlight
No specific adjustable access platform 2 m (6 ft. 7 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-41-00-010-002 Open the Avionics Compartment Doors for Access 52-41-00-410-002 Close the Avionics Compartment Doors after Access 53-12-13-000-001 Removal of the avionics compartment floor panels 53-12-13-400-001 Installation of the avionics compartment floor panels 53-19-41-000-001 Removal of the Collector Grid and the Container 53-19-41-400-001 Installation of the Collector Grid and the Container
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Post SB 53-1143 For A/C 001-003,
53-19-00-991-002 Fig. 602
R EFF : 001-049, 054-099, 101-149, 151-199, 53-19-00Page 605 201-299, 301-399, 401-499, Aug 01/05
CES
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499,
3. Job Set-up
__________
R **ON A/C 001-049, 054-099, 101-149, 151-199, 201-299, 301-399, 401-499, Post SB 53-1143 For A/C 001-003, Subtask 53-19-00-010-054
A. Get Access
(1)
Put an adjustable access platform in position at zone 831 (841).
(2)
Open the FWD passenger/crew door 831 (841) (Ref. TASK 52-10-00-010-001).
(3)
Remove the collector grid (Ref. TASK 53-19-41-000-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(121)
