CES CES
3. Job Set-up__________
Subtask 53-11-00-010-078
A. Get Access
R (1) Put an access platform at the zone 110.
R (2) Open the radome 110AL (Ref. TASK 53-15-11-010-001)
R (3) Put an access platform at the zone 110.
R (4) Remove the protection shield.
Subtask 53-11-00-110-088
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-054
R A. Inspection (Ref. Fig. 642/TASK 53-11-00-991-051)
R R (1) Do a detailed inspection of the structure of the forward face of the front pressure bulkhead attached to FR1.
R Forward Face of the Forward Pressure Bulkhead Attached to FR1 R Figure 642/TASK 53-11-00-991-051
EFF : ALL 53-11-00Page A664 Aug 01/03
CES CES
(2) Make sure that there is no:
R R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-410-078
A. Close Access
(1) Install the protection shield.
R R (2) Make sure that the work area is clean and clear of tool(s) and other items.
R (3) Close the radome 110AL (Ref. TASK 53-15-11-410-001).
R (4) Remove the access platform(s).
TASK 53-11-00-210-041
R Detailed Inspection of Cockpit Side Windows, External Visible Portion of R Framework, between FR 4 and FR 12, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531176-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4.5 m (14 ft. 9 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) R 53-11-00-991-052 Fig. 643
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(70)
