B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-15-11-010-001 Opening of the Radome 110AL
53-15-11-991-009 Fig. 412
3. Job Set-up
__________
Subtask 53-15-11-865-064
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
R **ON A/C 051-099,
R 121VU COM NAV/RADAR/2 5SQ2 K14
EFF : ALL
53-15-11Page 440
R **ON A/C ALL
Subtask 53-15-11-941-058
B. Get Access WARNING : DO NOT OPEN THE RADOME IF THE WIND SPEED IS MORE THAN 35 KNOTS.
_______
(1)
Put the access platform in position in the zone 110 in front of the radome.
(2)
In the cockpit, put a warning notice in position on the center pedestal to tell persons not to operate the radar system.
(3)
Open the radome (Ref. TASK 53-15-11-010-001).
4. Procedure
_________
Subtask 53-15-11-020-058
A. Removal of the Arrestor Pick-Up Fitting
(Ref. Fig. 412/TASK 53-15-11-991-009)
NOTE : The removal procedure is the same for each fitting.
____
(1)
Remove the nuts (63) and the bolts (61).
(2)
Remove the arrestor pick-up fitting (62).
EFF : ALL
53-15-11Page 441
Arrestor Pick-Up Fitting Figure 412/TASK 53-15-11-991-009
R EFF : CES ALL 53-15-11 Page 442 Aug 01/02
TASK 53-15-11-400-004
Installation of the Arrestor Pick-Up Fitting
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B R CORROSION INHIBITING FILLET CONSISTENCY R (Ref. 20-31-00)
Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-28-00-869-002 Table of the Maximum Permitted Resistance Values 53-15-11-010-001 Opening of the Radome 110AL 53-15-11-410-001 Closing of the Radome 110AL 53-15-11-991-009 Fig. 412
EFF : ALL
53-15-11Page 443
3. Job Set-up
__________
Subtask 53-15-11-869-055
A. Aircraft Maintenance Configuration
(1)
Make sure that the radome is open (Ref. TASK 53-15-11-010-001).
(2)
Make sure that the access platform is in position in the zone 110.
(3)
Make sure that the warning notice which tells persons not to operate the radar system is in position on the center pedestal.
Subtask 53-15-11-865-067
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
R **ON A/C 051-099,
R 121VU COM NAV/RADAR/2 5SQ2 K14 R **ON A/C ALL
4. Procedure
_________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(107)
