3. Job Set-up__________
Subtask 53-11-00-941-082
A. Get Access
R (1) Put an access platform at the zone 210.
Subtask 53-11-00-110-089
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-055
R A. Inspection (Ref. Fig. 643/TASK 53-11-00-991-052)
R R R (1) Do a detailed inspection of the external portion that you can see of the frame of the cockpit side windows. This inspection is applicable between FR4 and FR12 (left and right sides).
(2) Make sure that there is no:
R R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
CES
R R Frame of the Cockpit Side Windows - FR4 to FR12 Figure 643/TASK 53-11-00-991-052
EFF : ALL 53-11-00 Page A668 Aug 01/03
CES
R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-942-090
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the access platform(s).
TASK 53-11-00-210-042
R Detailed Inspection of Cockpit Windshield, External Portion of Framework Covered by Retainers
1. Reason for the Job__________________
Refer to the MPD TASK: 531177-01
2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R R R -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific access platform 4.5 m (14 ft. 9 in.)
R B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 Material No. 19-003 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
R C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 56-11-11-000-001 56-11-11-400-001 SRM 511100 P.Block 001 SRM 512200 P.Block 001 53-11-00-991-053 Removal of the WindshieldInstallation of the Windshield(for corrective action)(for corrective action) Fig. 644
CES
3. Job Set-up
__________
Subtask 53-11-00-020-055
A. Get Access
R (1) Put an access platform at the zone 210.
R (2) Removal of the components
R (a) Remove the retainers one at a time:
1_ Remove the retainer (Ref. TASK 56-11-11-000-001).
2_ Clean the inspection area (Ref. para. 3.B.).
3_ Do an inspection of the structure (Ref. para. 4.A.).
4_ Install the retainer (Ref. TASK 56-11-11-400-001).
R 5_ Do the same operation for the other retainers.
Subtask 53-11-00-110-090
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-056
R A. Inspection (Ref. Fig. 644/TASK 53-11-00-991-053)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUSELAGE 机身1(71)
