-
the REFUEL VALVES switches set to NORM
-
the MODE SELECT switch set to REFUEL.
Where the preselected quantity is greater than the maximum capacity of both the wing tanks fuel will automatically be added to the center tank.
The END annunciator, on the preselector 5QT, will come on when the refuel procedure is complete. That is when the ACTUAL value is the same as the PRESELECTED value +/- 100kg (220lb). If the refuel procedure stops before the ACTUAL value and the PRESELECTED value are the same, the END annunciator will flash to show a fault.
To control pressure refuel manually, the MODE SELECT switch on panel (800VU) is set to REFUEL and the REFUEL VALVES switch(es) are set to OPEN. The quantities of fuel that go into the tanks are then monitored at the indicator (6QT). When the tank(s) have the required amounts, the REFUEL VALVE switch(es) are set to SHUT.
1EFF : ALL 1 28-25-00Page 50 1 1 May 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
B. Defueling To defuel the aircraft you must use the main fuel pumps (Ref. 28-21-00) to remove the fuel from the fuel tanks.
To defuel the aircraft you must set:
-
the X FEED P/BSW (Ref. 28-23-00), on the panel 40VU, to OPEN
-
the L TK (R TK) PUMPS 1 and 2 P/BSWs (Ref. 28-21-00), on the panel 40VU, to ON
-
the CTR TK PUMPS 1 and 2 P/BSWs, on the panel 40VU, to ON
-
the REFUEL VALVES switches, on the panel 800VU, to SHUT
-
the MODE SEL switch, on the panel 800VU, to DEFUEL XFR.
**ON A/C 301-399,
B. Defueling To defuel the aircraft you must use the main fuel pumps (Ref. 28-21-00) to remove the fuel from the fuel tanks. If there is fuel in the center (transfer) tank, you must move the fuel to the wing tanks (Ref. 28-26-00) before you can defuel the aircraft completely.
To defuel the aircraft you must set:
-
the X FEED P/BSW (Ref. 28-23-00), on the panel 40VU, to OPEN
-
the L TK (R TK) PUMPS 1 and 2 P/BSWs (Ref. 28-21-00), on the panel 40VU, to ON
-
the CTR TK L (R) XFR P/BSWs, on the panel 40VU, to ON
-
the REFUEL VALVES switches, on the panel 800VU, to SHUT
-
the MODE SEL switch, on the panel 800VU, to DEFUEL XFR.
**ON A/C ALL
C. Fuel Transfer
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
To move fuel from one tank to another tank, you must set:
-
the main fuel pump (Ref. 28-21-00) to ON, for the the tank from which you move the fuel
-
the X FEED P/BSW (Ref. 28-23-00), on the panel 40VU, to OPEN
-
the REFUEL VALVE switch, on the panel 800VU, to OPEN, for the tank to which you move the fuel
-
the MODE SEL switch, on the panel 800VU, to DEFUEL XFR.
1EFF : ALL 1 28-25-00Page 51 1 1 Aug 01/05 1 1 1CES 1
Refuel/Defuel Control Panel
Figure 015 (SHEET 1)
1EFF : ALL 1 28-25-00 Page 52
1 1 May 01/05
1 1
1CES 1
Refuel/Defuel Control Panel
Figure 015 (SHEET 2)
1EFF : ALL 1 28-25-00 Page 53
1 1 May 01/05
1 1
1CES 1
**ON A/C 301-399,
To move fuel from one wing tank to the other wing tank, or, to the center (transfer) tank, you must set:
-
the main fuel pump (Ref. 28-21-00) to ON, for the tank from which you move the fuel
-
the X FEED P/BSW (Ref. 28-23-00) (on the panel 40VU) to OPEN
-
the applicable REFUEL VALVE switch (on the panel 800VU) to OPEN, for the tank that is to get the fuel
-
the MODE SEL switch (on the panel 800VU) to DEFUEL XFR.
**ON A/C ALL
8. BITE Test_________ Not applicable
1EFF : ALL 1 28-25-00Page 54 1 1 May 01/05 1 1 1CES 1 REFUEL/DEFUEL SYSTEM - SERVICING
________________________________
TASK 28-25-00-650-001
Pressure Defuel
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : DO NOT SPILL FUEL ON THE ENGINES OR THE BRAKES. IF YOU SPILL FUEL ON
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FUEL 燃油4(26)
