• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-22 06:55来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 1EFF : ALL 1 28-25-54Page 405 1 1 Feb 01/98 1 1 1CES 1 C. Referenced Information


 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002  Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 28-25-54-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 28-25-54-941-053
 A. Safety Precautions
 (1)
 Make sure that the safety barriers are in position. Subtask 28-25-54-860-051

 B. Aircraft Maintenance Configuration

 (1)
 Make sure that the access door 192MB is open. Subtask 28-25-54-865-051


 C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU ELEC/REFLNG/NORM 2PR S27 122VU ELEC/REFLNG/ON/BAT 1PR U28
 1EFF : ALL 1 28-25-54Page 406 1 1 Feb 01/98 1 1 1CES 1


 4. Procedure
_________
 (Ref. Fig. 401/TASK 28-25-54-991-001) Subtask 28-25-54-420-051
 A. Preparation for Installation
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL

_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1)
 Clean the component interface and/or the adjacent area with a MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-004).

 (2)
 Make sure that the parts retained from the removed component are clean and in the correct condition.


 (3) Do an inspection of the component interface and/or the adjacent area. Subtask 28-25-54-420-050
 B. Installation of the Floodlight 32QU
 (1)
 Install the lamp (6) in the lamp holder (3) and install the screws (5).

 (2)
 Put the lamp holder (3) in position on the bracket (2).

 (3)
 Install the screws (4).

 (4)
 Connect the electrical wires to the lamp (6).

 (5)
 Install the cap (1) on the lamp (6).

 (6)
 Safety the electrical cables and the cap (1) to the lamp (6) with a cable-tie.

 (7)
 Clean the lens of the lamp (6) with a MISCELLANEOUS (Material No. 19-003).


 1EFF : ALL 1 28-25-54Page 407 1 1 Feb 01/98 1 1 1CES 1 Subtask 28-25-54-865-052


 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1PR, 2PR.
 Subtask 28-25-54-861-050
 D. Energize the Electrical Circuits
 (1) Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002)
 Subtask 28-25-54-710-050
 E. Test
 (1) Close the access door 192MB.
 (2) Open the access door 192MB and make sure that the lamp (6) comes on. Subtask 28-25-54-916-050
 F. Application of Special Materials
 (1) Apply a layer of STORAGE PRESERVATION (Material No. 15-007) to the screws (4) and the screws (5).
 5. Close-up
________ Subtask 28-25-54-410-050
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Close the access door 192MB. Subtask 28-25-54-862-050
 B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
 1EFF : ALL 1 28-25-54Page 408 1 1 Feb 01/98 1 1 1CES 1 Subtask 28-25-54-942-050


 C. Removal of Equipment
 (1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
 1EFF : ALL 1 28-25-54Page 409 1 1 Feb 01/98 1 1 1CES 1 CONTROL PANEL - REFUEL/DEFUEL (800VU) - REMOVAL/INSTALLATION


____________________________________________________________
 TASK 28-25-55-000-001
 Removal of the Refuel Panel 800VU
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FUEL 燃油4(107)