737-300 400 500 AMM 飞机维护手册 自动飞行 AUTOFLIGHT 1(56)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 CHANNEL SELECTION page.
 (l)  Push the LSK adjacent to <CHANNEL A to show the FCC memory
 contents of channel A.
 (m)  Push the LSK adjacent to <TEST SELECTION.
 (n)  Use the CDU keyboard to put the library test No. 13 into the
 CDU scratchpad.
 (o)  Push the LSK 6R to put the library test No. 13 on the screen
 and in the memory.
 (p)  Push the LSK adjacent to <EXECUTE to do the test 60.13 (MCP
 Interface Quick Test).
 (q)  Do the preparation steps as shown on the CDU display but keep
 the TR2, TR3, and AFCS B FCC DC circuit breakers open.
 (r)  Push the LSK adjacent to <CONTINUE until the question "Is the
 G/S ENGAGE displayed on the CAPT FMA?" is shown on the CDU.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú

 22-11-00
 ú ú 11 Page 529 ú Jul 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (s)  
Make sure that the DC voltmeter on the Pilots' Overhead Panel, P5-13 is at 0v dc when the question "Is the G/S ENGAGE displayed on the CAPT FMA?" is shown on the CDU.

 (t)  
Close the AFCS B FCC DC circuit breaker on the P6-2 Circuit Breaker Panel.

 (u)  
Close the TR2 circuit breaker on the P6-4 Circuit Breaker Panel.

 (v)  
Set the meter selector switch for the TRU to the TR1 position.

 (w)  
Open the TR1 circuit breaker on the P6-4 Circuit Breaker Panel.

 (x)  
Open the AFCS A FCC DC circuit breaker on the P18-1 Circuit Breaker Panel.

 (y)  
Make sure that the DC voltmeter on the Pilots' Overhead Panel, P5-13 reads 22 to 30v dc.

 (z)  
Do the steps (e) thru (k) until the CDU display shows the CHANNEL SELECTION page. (aa) Push the LSK adjacent to <CHANNEL B to show the FCC memory

 contents of channel B.
 (ab) Push the LSK adjacent to <TEST SELECTION.
 (ac) Use the CDU keyboard to put the library test No. 13 into the CDU scratchpad.
 (ad) Push the LSK 6R to put the library test No. 13 on the screen and in the memory.
 (ae) Push the LSK adjacent to <EXECUTE to do the test 60.13 (MCP Interface Quick Test).
 (af) Do the preparation steps as shown on the CDU display but keep the TR1, TR3, and AFCS A FCC DC circuit breakers open.
 (ag) Push the LSK adjacent to <CONTINUE until the question "Is the G/S ENGAGE displayed on the F/O FMA?" is shown on the CDU.
 (ah) Make sure that the DC voltmeter on the Pilots' Overhead Panel, P5-13 is at 0v dc when the question "Is the G/S ENGAGE displayed on the F/O FMA?" is shown on the CDU.
 (ai) Close the TR1 and TR3 circuit breakers on the P6-4 Circuit Breaker Panel. (aj) Close the AFCS A FCC DC circuit breaker on the P18-1 Circuit Breaker Panel.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú

 22-11-00
 ú ú 12 Page 530 ú Jul 15/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (ak) Push the INIT/REF key on the CDU keyboard to get out of the BITE.
 K. Circuit Breaker Interface Test
 S 865-034
 WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
_______ SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDER, ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (1)  
Supply hydraulic power (AMM 29-15-00/201).

 S 745-035

 (2)  
Do the Circuit Breaker Interface Test

 (a)  
Set the captain's and first officer's flight director switches on the MCP to the OFF position.

 (b)  
Open the AFCS A FCC DC circuit breaker on the P18-1 Circuit Breaker Panel.

 (c)  
Make sure that the COMPUTER flag comes into view on the captain's ADI.

 (d)  
Close the AFCS A FCC DC circuit breaker on the P18-1 Circuit Breaker Panel.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 自动飞行 AUTOFLIGHT 1(56)