22-11-13
LIMITER ú
ú 02 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 404Jul 12/00
A
737-300/400/500MAINTENANCE MANUAL
AILERON FORCE LIMITER - ADJUSTMENT/TEST
_______________________________________
1. General
_______
A. This test makes sure that the aileron force limiter (AFL) and autopilot system operate correctly.
TASK 22-11-13-715-012
2. Aileron Force Limiter Test
__________________________
A. References
(1)
22-11-01/501 or 22-11-00/501, Digital Flight Control System
(2)
24-22-00/201, Manual Control
(3)
29-15-00/201, Hydraulic A, B, and Standby System
B. Access
(1) Location Zones
101 Control Cabin, Left
102 Control Cabin, Right
C. Prepare to test the aileron force limiter:
S 865-001
(1) Supply electrical power (Ref 24-22-00/201).
S 865-003
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
_______ SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDER, ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Supply hydraulic power (Ref 29-15-00/201).
S 865-004
(3)
Make sure that the hydraulic system A and B switches on the P5 panel are in the ON position.
(4)
Make sure that these circuit breakers are closed:
S 865-005
NOTE: Make sure that you close the AFCS A FCC DC and AFCS B FCC DC
____
circuit breakers last.
(a) P6 Circuit Breaker Panel
1) AFCS B MACH TRIM DC
2) AFCS B MACH TRIM AC
3) AFCS B SNSR EXC AC
4) AFCS B FCC DC
5) AFCS B ENGAGE INTLK
6) AFCS B WARN LIGHT BAT
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH MECHANICAL AILERON FORCE ú
22-11-13
LIMITER ú
ú 03 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 501Jul 15/95
A
737-300/400/500MAINTENANCE MANUAL
7) AFCS MCP CRS
(b) P18 Circuit Breaker Panel
1) AFDS MCP DC
2) AFCS A MACH TRIM DC
3) AFCS A MACH TRIM AC
4) AFDS AIL FORCE LIM
5) AFCS A SNSR EXC AC
6) AFCS A FCC DC
7) AFCS A ENGAGE INTLK
8) AFCS A WARN LIGHT BAT
S 865-006
(5) Make sure that the flaps are up.
D. Aileron Force Limiter Test
S 825-013
(1)
Do the Aileron Rigging Test (tests 52.16 thru 52.20) in this task: "Rigging Test" to make sure the aileron force limiters are correctly rigged (22-11-01/501 or 22-11-00/501).
S 715-008
(2)
Do the aileron force limiter test:
(a)
Align the IRS in the NAV mode.
(b)
Engage the autopilot channel A to the CMD mode.
(c)
Set the Bank Limit Switch on the MCP to 30 degrees.
(d)
Adjust the MCP HDG control to align HDG bug under the cursor on the EHSI.
(e)
Push the HDG SEL button.
(f)
Turn the HDG SEL control on the MCP to increase the heading display by 45 degrees.
(g)
Make sure that the control wheel turns clockwise and stops between 15 and 19 degrees (2.8 to 3.2 units on the control wheel scale).
(h)
Lower the flaps to 10 units.
(i)
Make sure that the control wheel turns clockwise and stops between 23 and 27 degrees (3.8 to 4.5 units on the control wheel scale).
(j)
Turn the HDG SEL control on the MCP to align the HDG BUG under the cursor on the EHSI.
(k)
Disengage the autopilot.
(l)
Do the steps (a) through (i) again for the counterclockwise direction.
(m)
Make sure that the difference between the two control wheel values is not more than 4 degrees.
(n)
Do the steps (a) through (k) again for the autopilot channel B.
(3)
Remove hydraulic power if it is not necessary (Ref 29-15-00/201).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 自动飞行 AUTOFLIGHT 1(162)
