(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 0.4718 | 0.4722 | | | 0.4711 | | | | OD 7 |(11.983) |(11.993) | | |(11.965) | | | | | | | 0.0002 | 0.0013 | | | 0.0028| | | | | (0.005) | (0.033) | | |(0.071) | | F | 0.4724 | 0.4731 | | | | 0.4739 | | | ID 8 |(11.998) |(12.016) | | | |(12.037) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-056
G. Inspection of the Aft Fixed Fairing
(Ref. Fig. 603/TASK 54-54-00-991-005)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | G | 0.4365 | 0.4370 | | | 0.4349 | | | | OD 9 |(11.087) |(11.099) | | |(11.046) | | | | | | | 0.0020 | 0.0032 | | | 0.0064| | | | | (0.050) | (0.081) | | |(0.162) | | G | 0.4390 | 0.4397 | | | | 0.4413 | | | ID 12 |(11.150) |(11.168) | | | |(11.209) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-057
H. Inspection of the Aft Fixed Fairing
(Ref. Fig. 603/TASK 54-54-00-991-005)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | G | 0.4365 | 0.4370 | | | 0.4346 | | | | OD 9 |(11.087) |(11.099) | | |(11.038) | | | | | | | 0.0020 | 0.0032 | | | 0.0078| | | | | (0.050) | (0.081) | | |(0.198) | | G | 0.4390 | 0.4397 | | | | 0.4424 | | | ID 10 |(11.150) |(11.168) | | | |(11.236) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-058
J. Inspection of the Aft Fixed Fairing
(Ref. Fig. 603/TASK 54-54-00-991-005)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | G | 0.5505 | 0.5509 | | | 0.5498 | | | | OD 10 |(13.982) |(13.992) | | |(13.964) | | | | | | | 0.0003 | 0.0014 | | | 0.0028| | | | | (0.007) | (0.035) | | |(0.071) | | G | 0.5512 | 0.5519 | | | | 0.5526 | | | ID 13 |(14.000) |(14.018) | | | |(14.036) | | -------------------------------------------------------------------------------
Subtask 54-54-00-220-059
K. Inspection of the Aft Fixed Fairing
(Ref. Fig. 603/TASK 54-54-00-991-005)
(1) Measure the dimension of the aft fixed fairing and make sure that the dimensions are correct.
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | IN. (MM) | IN. (MM) | IN. (MM) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |IN. (MM)| |--------|---------|---------|---------|---------|---------|---------|--------| | G | 0.4365 | 0.4370 | | | 0.4361 | | | | OD 11 |(11.087) |(11.099) | | |(11.076) | | | | | | | -0.0004 | 0.0009 | | | 0.0017| | | | |-(0.010) | (0.022) | | |(0.043) | | G | 0.4366 | 0.4374 | | | | 0.4378 | | | ID 14 |(11.089) |(11.109) | | | |(11.120) | | -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM NACELLES/PYLONS(96)
