• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:52来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

5. Close-up
________
 Subtask 54-51-17-420-050
 A. Installation of the Pylon-to-Wing Forward Attach-Fitting
 (1) Install the pylon-to-wing forward attach-fitting (Ref. TASK 54-51-17-400-001).

 TASK 54-51-17-200-002


 Inspection of the Pylon-to-Wing Aft Attach-Fitting
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
54-51-17-000-002 Removal of the Pylon-to-Wing Aft Attach Fitting at
 RIB10 54-51-17-200-004 Inspection of the Shackles at RIB10 54-51-17-400-002 Installation of the Pylon-to-Wing the Aft Attach
 Fitting at RIB10
 3. Job Set-up
__________ Subtask 54-51-17-020-051
 A. Removal of the Pylon-to-Wing Aft Attach-Fitting
 (1) Remove the pylon-to-wing aft attach-fitting (Ref. TASK 54-51-17-000-002).
 4. Procedure
_________ Subtask 54-51-17-210-051
 A. Inspection of the Pylon-to-Wing Aft Attach-Fitting
 (1)
 Do a visual inspection of the yokes attached to the main frame and the wing, the fail-safe bolts, the shackles and the sleeves.

 (2)
 If you find wear on the sleeves and/or shackles, you must examine the pylon-to- wing forward attach-fitting (Ref. TASK 54-51-17-200-004).

 


 -------------------------------------------------------------------------------| | Yoke | Shackles | Fail-safe | Sleeves | | | Pylon side | | bolts | | | | Wing side | | | | |-----------------------------------------------------------------------------| | Superficial | Repair, refer to | Ref. 54-51-00| Replace | Replace | | wear | the manufacturer's | P. Block 601 | | | | | instructions | | | | |-----------------------------------------------------------------------------| | Deformation | Repair, refer to | Replace | Replace | Replace | | | the manufacturer's | | | | | | instructions | | | | |-----------------------------------------------------------------------------| | Corrosion | Repair, refer to | Ref. 54-51-00| | Replace | | | the manufacturer's | P. Block 601 | | | | | instructions | | | | |-----------------------------------------------------------------------------| | Structural | Repair, refer to | Replace | Replace | Replace | | defects | the manufacturer's | | | | | | instructions | | | | |-----------------------------------------------------------------------------| | Bore | Replace the | Replace | | Replace | | out-of-round | bushes | | | | |-----------------------------------------------------------------------------| | Bore wear | Replace the | Replace | | Replace | | | bushes | | | | |-----------------------------------------------------------------------------|
 5. Close-up
________
 Subtask 54-51-17-420-051
 A. Installation of the Pylon-to-Wing Aft Attach-Fitting
 (1) Install the pylon-to-wing aft attach-fitting (Ref. TASK 54-51-17-400-002).

 TASK 54-51-17-200-003


 Inspection of the Shackles at RIB4 and the Spigot
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific warning notice
 No specific access platform 1.8 m (5 ft. 11 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
54-51-17-000-001 Removal of the Pylon-to-Wing Forward Attach Fitting at RIB4 54-51-17-400-001 Installation of Pylon-to-Wing Forward Attach Fitting at RIB4 78-30-00-081-041 Make the Thrust Reverser Serviceable after Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
 Maintenance 54-51-17-991-008 Fig. 601 54-51-17-991-009 Fig. 602 54-51-17-991-010 Fig. 603

 3. Job Set-up
__________

 Subtask 54-51-17-941-052
 A. Safety Precautions
 (1)
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NACELLES/PYLONS(62)