• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:52来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 E. Installation of Components
 (1)
 Install the engine (Ref. TASK 71-00-00-400-042).

 (2)
 Install the fan thrust reverser cowl doors (Ref. TASK 78-32-11-400-040).

 -
FOR 1000EM1
 451AL, 452AR


 -
FOR 1000EM2
 461AL, 462AR

 


 (3)
 Install the fan cowls doors (Ref. TASK 71-13-11-400-040).

 -
FOR 1000EM1
 437AL, 438AR


 -
FOR 1000EM2
 447AL, 448AR

 

 

 Subtask 54-51-17-942-050
 F. Close Access
 (1)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (2)
 Remove the access platform(s).

 (3)
 Remove the warning notice(s).


 1EFF : ALL 1 54-51-17Page 417 1 1 May 01/03R 1 1 1CES 1

 TASK 54-51-17-000-002


 Removal of the Pylon-to-Wing Aft Attach Fitting at RIB10
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT YOU HAVE THE CORRECT FIRE FIGHTING EQUIPMENT
_______ AVAILABLE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific access platform 1.5 m (4 ft. 11 in.) No specific dynamometric cell 400 kg (881.8488 lb) 98D54003005000 1 PYLON SHAFT EXTRACTOR RIB 4/RIB 10 98D54503000000 1 PYLON REMOVAL-WRENCH
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
05-57-00-200-001 Aircraft Stability 07-11-00-581-001 Lifting for Aircraft Maintenance Operations 28-00-00-910-001 Fuel Safety Procedures 54-54-00-000-001 Removal of the Aft Fixed Fairing 71-00-00-000-042 Removal of the Power Plant 71-13-11-000-040 Removal of the Fan Cowl Doors 78-32-11-000-040 Removal of the Left or Right Half Door of Thrust
 Reverser 54-51-17-991-007 Fig. 405
 1EFF : ALL 1 54-51-17Page 418 1 1 May 01/03R 1 1 1CES 1


 3. Job Set-up
__________ Subtask 54-51-17-860-051
 A. Safety Precautions
 (1)
 On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2)
 Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.

 (3)
 On the overhead maintenance panel 50VU:

 (a)
 Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.

 (b)
 Put a warning notice to tell persons not to energize the FADEC 1(2).

 

 (4)
 Obey the fuel safety procedures (Ref. TASK 28-00-00-910-001) when you do work on the fuel system.


 Subtask 54-51-17-869-053
 B. Aircraft Stability
 (1) Let the aircraft become stable (Ref. TASK 05-57-00-200-001). Subtask 54-51-17-581-052
 C. Aircraft Lifting
 (1) Lift the aircraft (Ref. TASK 07-11-00-581-001). NOTE : It is not necessary to lift the wheels of the aircraft off the
____ ground. Lift the aircraft sufficiently to prevent an effort caused by the reaction of the shock absorber.
 1EFF : ALL 1 54-51-17Page 419 1 1 May 01/03R 1 1 1CES 1


 Subtask 54-51-17-020-058

 D. Removal of Components
 (1)
 Remove the fan cowls doors (Ref. TASK 71-13-11-000-040).

 -
FOR 1000EM1
 437AL, 438AR


 -
FOR 1000EM2
 447AL, 448AR

 


 (2)
 Remove the thrust reverser cowls doors (Ref. TASK 78-32-11-000-040).

 -
FOR 1000EM1
 451AL, 452AR


 -
FOR 1000EM2
 461AL, 462AR

 


 (3)
 Remove the engine (Ref. TASK 71-00-00-000-042).


 (4) Remove the aft fixed fairing (Ref. TASK 54-54-00-000-001). Subtask 54-51-17-010-051
 E. Removal of the Panels
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NACELLES/PYLONS(56)