A320飞机维护手册 AMM LIGHTS 灯光2_航空信息_民用航空_通用航空

Subtask 33-41-15-941-051

B. Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the APU
tail-cone-exhaust area, Zone 317.
4. Procedure_________
(Ref. Fig. 402/TASK 33-41-15-991-002)
Subtask 33-41-15-020-052
A. Removal of the Lamps of the Tail Navigation Light
R (1) Only if a sealing is defective, discard it.
R (2) Hold the lens (7).
R (3) Remove the screws (9).
R (4) Remove and discard the sealing-rings (8).
R (5) Remove the lens (7) from the tail navigation light (1).
R (6) Remove the sealing (4).
R (7) Remove the clips (6) and (10) and the white lenses (5) and (11).
R (8) Remove the lamps (3) and (12).
R (9) Remove the sealing (2) and (13).

R R Tail Navigation Light 15LA Figure 402/TASK 33-41-15-991-002
1EFF : 1 1 1CES ALL 1 111 33-41-15 Page 410 Aug 01/04

TASK 33-41-15-400-002
Installation of the Lamp(s) of the Tail Navigation Light 15LA
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
RR 8 sealing-ring 33-41-15 01A-030
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R 24-41-00-861-002 24-41-00-862-002 33-41-00-710-001 33-48-00-710-002 33-41-15-991-002 Energize the Aircraft Electrical Circuits from the External PowerDe-energize the Aircraft Electrical Circuits Supplied from the External PowerOperational Test of the Navigation Lights Operational Test of the Anti-Collision/Strobe LightingFig. 402

3. Job Set-up__________
Subtask 33-41-15-865-054
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU APU/APU/CTL 2KD L42 121VU APU/ECB/SPLY 1KD L41 122VU LIGHTING/EXT LT/NAV1/AND LOGO/LT 1LA T03 122VU LIGHTING/EXT LT/NAV2/AND LOGO/LT 2LA T02 122VU LIGHTING/WING/STROBE 10LV V05
4. Procedure_________
(Ref. Fig. 402/TASK 33-41-15-991-002)
Subtask 33-41-15-910-051
A. Preparation for Installation
R R (1) Make sure that the parts retained from the removed component are clean and in the correct condition.
R (2) Clean the component interface and/or the adjacent area.
R (3) Do an inspection of the component interface and/or the adjacent area.
Subtask 33-41-15-420-052
B. Installation of the Lamps of the Tail Navigation Light
CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS._______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
R (1) Only install new sealings, if necessary.
R (2) Install the sealings (2) and (13).
R (3) Install the lamps (3) and (12).

R (4) Put the white lenses (5) and (11) in position on the tail navigation light (1) and install the clips (6) and (10).
R (5) Install the sealing (4).
R (6) Put the lens (7) in position on the tail navigation light (1).
R (7) Install the screws (9) each with a new sealing-ring (8).
Subtask 33-41-15-865-055
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1LA, 2LA, 10LV, 1KD, 2KD.
Subtask 33-41-15-861-051
D. Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
Subtask 33-41-15-710-051
R R E. Do the operational test of the tail navigation lights (Ref. TASK 33-41-00-710-001) and (Ref. TASK 33-48-00-710-002).
5. Close-up________
Subtask 33-41-15-942-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the access platform(s).
Subtask 33-41-15-862-051
B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).