A320飞机维护手册 AMM LIGHTS 灯光2(146)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 turn counterclockwise to
 retract it to the DISARMED
 position.
 On the overwing fuselage:
 - the related emergency overwing lights
 come on.
 2. At the emergency exits:  At the emergency exits:
 - push the latch pin against the  - the SLIDE ARMED light comes on.
 spring and turn it a quarter
 turn clockwise to extend it to
 the ARMED position.
 On the overwing fuselage:
 - the related emergency overwing lights
 go off.
 3. At the emergency exits:  At the emergency exits:
 - install and close the removed  - the SLIDE ARMED light goes off.
 cover flap on the related
 hatch. 

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 33-51-15Page 408 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 5. Close-up
________ Subtask 33-51-15-410-053
 A. Close Access
 (1) Remove the wing mats.
 (2) Remove the access platform(s). Subtask 33-51-15-862-052
 B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 33-51-15Page 409 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 SIGN - EMERGENCY EXIT (40WL,41WL,42WL,43WL,44WL,45WL) - REMOVAL/INSTALLATION

____________________________________________________________________________
 TASK 33-51-16-000-001
 Removal of the Emergency Exit Sign
 NOTE : The procedure is the same for all emergency exit signs.
____
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific blanking caps
 No specific circuit breaker(s) safety clip(s)
 No specific stepladder 1.0 m (3 ft. 3 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 001-049, 051-099, 101-149, 201-299, 303-399,
 33-51-16-991-001 Fig. 401 R **ON A/C 151-199, 401-499,
 33-51-16-991-001-A Fig. 401A
 **ON A/C 301-302,

 33-51-16-991-001-B Fig. 401B **ON A/C ALL

 3. Job Set-up
__________
 Subtask 33-51-16-865-050

 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU LIGHTING/EMER LT/CABIN 2WL H06 49VU LIGHTING/EMER LT/CABIN 1WL H05

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 33-51-16-860-050
 B. Aircraft Maintenance Configuration
 (1)
 On the overhead panel 25VU, make sure that the EMER EXIT LT switch 4WL is in the OFF position.

 (2)
 On the overhead panel 25VU, make sure that the NO SMOKING switch 190RH is in the OFF position

 (3)
 On the Forward Attendant Panel (FAP) 120RH, make sure that the LIGHT EMER pushbutton switch and its integral light are off.

 (4)
 Put the stepladder in position:

 FOR 40WL, 41WL
 in Zone 222 or in Zone 221,

 FOR 42WL, 43WL
 in Zone 242 or in Zone 241,

 FOR 44WL, 45WL
 in Zone 262 or in Zone 261.

 

 **ON A/C 301-399,
 Subtask 33-51-16-860-050-A
 B. Aircraft Maintenance Configuration
 (1)
 On the overhead panel 25VU, make sure that the EMER EXIT LT switch 4WL is in the OFF position.

 (2)
 On the overhead panel 25VU, make sure that the NO SMOKING switch 190RH is in the OFF position

 (3)
 On the Forward Attendant Panel (FAP) 120RH, make sure that the LIGHT EMER pushbutton switch and its integral light are off.

 (4)
 Put the stepladder in position:

 FOR 40WL, 41WL
 in Zone 222 or in Zone 221,
 FOR 42WL, 43WL

 in Zone 252 or in Zone 251,
 FOR 44WL, 45WL
 in Zone 262 or in Zone 261,
 FOR 46WL, 47WL

 in Zone 232 or in Zone 231.
 **ON A/C ALL

 4. Procedure
_________
 **ON A/C 001-049, 051-099, 101-149, 201-299, 303-399,
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光2(146)