B. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------33-41-15-000-001 Removal of the Tail Navigation Light 15LA
R **ON A/C 051-099, 106-149, 156-199, 209-299, 301-399, 401-499, Post SB 33-1037 For A/C 051-099, 33-48-13-991-001 Fig. 401
**ON A/C ALL
3. Job Set-up
__________
Subtask 33-48-13-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU APU/APU/CTL 2KD L42 121VU APU/ECB/SPLY 1KD L41 122VU LIGHTING/EXT LT/NAV1/AND LOGO/LT 1LA T03 122VU LIGHTING/EXT LT/NAV2/AND LOGO/LT 2LA T02 122VU LIGHTING/WING/STROBE 10LV V05
Subtask 33-48-13-010-050
B. Get Access
(1)
Put the access platform in position at the APU tail cone exhaust-area Zone 317.
(2)
Remove the tail navigation light (3) (Ref. TASK 33-41-15-000-001).
4. Procedure
_________ R **ON A/C 051-099, 106-149, 156-199, 209-299, 301-399, 401-499, Post SB 33-1037 For A/C 051-099, (Ref. Fig. 401/TASK 33-48-13-991-001) **ON A/C ALL
Subtask 33-48-13-020-050
A. Removal of the Tail Cone Strobe-Light (19LV) WARNING : DO NOT REMOVE THE STROBE LIGHT FOR AT LEAST TEN MINUTES AFTER
_______ YOU DE-ENERGIZE THE ELECTRICAL CIRCUITS. THE HIGH VOLTAGE ELECTRICAL CURRENT IN THE CAPACITOR OF THE STROBE LIGHT IS DANGEROUS.
Tail Cone Strobe-Light
Figure 401/TASK 33-48-13-991-001
R 1EFF : 051-099, 106-149, 156-199, 209-299, 1 33-48-13Page 403 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
WARNING : DO NOT DISCONNECT THE ELECTRICAL CONNECTIONS FOR AT LEAST 2
_______
MINUTES AFTER YOU DE-ENERGIZE THE ELECTRICAL CIRCUITS.
WARNING : BE CAREFUL IF YOU TOUCH THE STROBE LIGHT WITH THE COVER REMOVED
_______ AND THE POWER APPLIED. SOME COMPONENTS HAVE DANGEROUS VOLTAGES.
WARNING : DO NOT TOUCH THE STROBE LIGHTS FOR AT LEAST 5 MINUTES AFTER
_______ OPERATION. THE STROBE LIGHT WILL STILL BE HOT.
(1)
Remove the screws (1), the washers (2) and the tail cone strobe-light
(4) from the tail navigation light (3).
(2)
Remove the screws (5) and the lens (6).
(3)
Remove and discard the gasket (7). CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
(4)
Remove the screws (8) and the flash tube assembly (9).
1EFF : ALL 1 33-48-13Page 404 1 1 Feb 01/05R 1 1 1CES 1
TASK 33-48-13-400-001
Installation of the Tail Cone Strobe-Light (19LV)
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific clean, soft, lint-free cloth
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
gasket 33-48-13 01 -020
1EFF : ALL 1 33-48-13Page 405 1 1 Feb 01/05R 1 1 1CES 1
D. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------33-41-15-400-001 Installation of the Tail Navigation Light 15LA
33-48-00-710-002 Operational Test of the Anti-Collision/Strobe Lighting R **ON A/C 051-099, 106-149, 156-199, 209-299, 301-399, 401-499, Post SB 33-1037 For A/C 051-099, 33-48-13-991-001 Fig. 401 **ON A/C ALL
3. Job Set-up
__________
Subtask 33-48-13-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光2(55)
