• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:07来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

57-37-12-000-001 Removal of the Navigation Light Glazing Panel 33-48-14-991-002 Fig. 402


 3. Job Set-up
__________ Subtask 33-48-14-941-052
 A. Safety Precautions
 (1) Put a warning notice on panel 25VU to tell persons not to operate the strobe lights or the navigation lights.
 (2) Put the safety barriers in position. Subtask 33-48-14-865-055
 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU LIGHTING/WING/STROBE 10LV V05
 Subtask 33-48-14-010-051
 C. Get Access
 (1)
 Put the access platform in position under the applicable wing-tip strobe light in zone 534 or 634.

 (2)
 Remove the glazing panel (1) from the applicable wing-tip strobe light (Ref. TASK 57-37-12-000-001).


 4. Procedure
_________
 (Ref. Fig. 402/TASK 33-48-14-991-002) Subtask 33-48-14-020-053
 A. Removal of the Strobe Light Flash-Tube Assembly CAUTION : BE CAREFULL WHEN YOU REMOVE THE ATTACHMENT SCREWS. THE LENS CAN
_______
 FALL OUT.

 (1)
 Remove the screws (2), the lens (3) and the gasket (4).

 (2)
 Remove the screws (5) and carefully remove the flash tube assembly (6).

 


 Strobe Light Flash Tube Assembly
 Figure 402/TASK 33-48-14-991-002
 1EFF :  ALL  1  33-48-14 Page 412 
1  1  Feb 01/98
 1  1
 1CES  1


 TASK 33-48-14-400-002


 Installation of the Strobe Light Flash-Tube Assembly WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific safety barriers No specific soap solution No specific warning notice No specific access platform 4.35 m (14 ft. 3 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
gasket  33-48-14 01 -035


 D. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-48-00-710-001 Operational Test of the Anti-Collision/Strobe Lighting 33-48-00-710-002 Operational Test of the Anti-Collision/Strobe
 Lighting 57-37-12-400-001 Installation of the Navigation Light Glazing Panel 33-48-14-991-002 Fig. 402
 3. Job Set-up
__________
 Subtask 33-48-14-941-054
 A. Safety Precautions
 (1)
 Make sure that the safety barriers are in position.

 (2)
 Make sure that the warning notice is on panel 25VU to tell persons not to operate the strobe lights or the navigation lights.


 Subtask 33-48-14-860-053
 B. Aircraft Maintenance Configuration
 (1) Make sure that the access platform is in position below the applicable wing-tip strobe light in zone 534 or 634.
 Subtask 33-48-14-865-056
 C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU LIGHTING/WING/STROBE 10LV V05


 4. Procedure
_________
 (Ref. Fig. 402/TASK 33-48-14-991-002)
 CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.

_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LIGHTS 灯光2(59)