R (b) If there is not an open circuit:
R - reconnect the electrical connector to the DEU TERMINATION BOX
R (209RH1).
R - disconnect the electrical connector from the DEU CONNECTION BOX
R (208RH1) (Ref. ASM 23-73/06),
R - do a check for continuity at the wiring between:
R DIR-CIDS, 1 (101RH) connector AA/D15 and the DEU CONNECTION BOX
R (208RH1) connector pin A/2,
R DIR-CIDS, 1 (101RH) connector AA/E15 and the DEU CONNECTION BOX
R (208RH1) connector pin A/1.
R 1_ If there is no continuity:
R - repair the wiring between the DIR-CIDS, 1 (101RH) connector
R and the DEU CONNECTION BOX (208RH1) connector (Ref. ASM 23-R 73/06).
R 2_ If there is continuity:
R - do a check for continuity of the wiring between:
R DEU CONNECTION BOX (208RH1) pin A/1 and pin A/9 ,
R DEU CONNECTION BOX (208RH1) pin A/2 and pin A/10.
R a_ If there is no continuity:
R - replace the DEU CONNECTION BOX (208RH1) (Ref. AMM TASK
R 23-73-42-000-001) and (Ref. AMM TASK 23-73-42-400-001).
R b_ If there is continuity:
R - reconnect the connector to the DEU CONNECTION BOX
R (208RH1).
R - do the steps 4. B. (6) again for the subsequent DEU
R CONNECTION BOXES until the maintenance message stops:
R DIR-CIDS, 1 (101RH) and DEU CONNECTION BOX (208RH3)
R connector,
R DIR-CIDS, 1 (101RH) and DEU CONNECTION BOX (208RH7)
R connector,
R DIR-CIDS, 1 (101RH) and DEU CONNECTION BOX (208RH13)
R connector,
R DIR-CIDS, 1 (101RH) and DEU TERMINATION BOX (209RH1)
R connector,
R (7) If the resistance (line to line) is less than 80 ohms (short
R circuit):
R - remove the DEU-A (200RH15) (Ref. AMM TASK 23-73-46-000-001).
R - do a check for a short circuit again.
R (a) If there is no short circuit:
R - install a new DEU-A (200RH15) (Ref. AMM TASK 23-73-46-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 401-499, ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page A207
Aug 01/05 CES
R (b) If there is a short circuit:
R - install the removed DEU-A (200RH15) (Ref. AMM TASK 23-73-46-R 400-001).
R - disconnect the electrical connector from the DEU TERMINATION
R BOX (209RH1) (Ref. ASM 23-73/06),
R - do a check for a short circuit again.
R 1_ If there is a short circuit:
R - reconnect the electrical connector to the DEU TERMINATION
R BOX (209RH1),
R - do the steps 4. B. (7) again for the subsequent DEUs and DEU
R CONNECTION BOXES until the maintenance message stops: (Ref.
R ASM 23-73/06)
R DEU-A (200RH13) and DEU CONNECTION BOX (208RH13),
R DEU-A (200RH7) and DEU CONNECTION BOX (208RH7).
R DEU-A (200RH3) and DEU CONNECTION BOX (208RH3),
R DEU-A (200RH1) and DEU CONNECTION BOX (208RH1),
R 2_ If there is no short circuit:
R - do a check for a short circuit at the disconnected connector
R between the pins A/9 and A/10 (Ref. ASM 23-73/06)
R a_ If there is a short circuit:
R - repair the wiring between the related CONNECTION BOX
R (208RHxx) and the DEU TERMINATION BOX (209RH1) CONNECTION
R BOX (208RHxx) (Ref. ASM 23-73/06).
R b_ If there is no short circuit:
R - replace the DEU TERMINATION BOX (209RH1) (Ref. AMM TASK
R 23-73-43-000-001) and (Ref. AMM TASK 23-73-43-400-001).
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
C. Installation of removed components
- Install the removed DIR-CIDS, 1 (101RH) and DIR-CIDS, 2 (102RH) (Ref. AMM TASK 23-73-34-400-001),
- Install all the removed DEU-A (200RHxx) (Ref. AMM TASK 23-73-46-400-001),
- Reconnect all the DEU-mount-connectors to the related DEU-mounts (2010VUxx/2014VUx) (Ref. AMM TASK 23-73-48-400-001).
- Make sure that all previously opened CBs are closed.
R **ON A/C 106-149, 301-399, 401-499,
C. Installation of removed components
- Install the removed DIR-CIDS, 1 (101RH) and DIR-CIDS, 2 (102RH) (Ref. AMM TASK 23-73-34-400-001),
- Install all the removed DEU-A (200RHxx) (Ref. AMM TASK 23-73-46-400-001),
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page A208
Aug 01/05 CES
- Reconnect all the DEU CONNECTION/ TERMINATION BOX-connectors to the related DEU CONNECTION/ TERMINATIOM BOX (208RHxx/209RHxx) (Ref. ASM 23-73/06).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 COMMUNICATIONS 通讯2(77)