DEU-B (300RH8) connector C/15 and the AIP (320RH11) connector
A/4,
DEU-B (300RH8) connector C/16 and the AIP (320RH11) connector
A/5,
DEU-B (300RH8) connector C/32 and the AIP (320RH11) connector
A/6,
**ON A/C ALL
C. Do the test given in Para. 3. A.
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-299,
TASK 23-73-00-810-900 PTP - CIDS FAIL or CIDS DEGRADATION status message
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-73-00-740-005 BITE Test of the Cabin Intercommunication Data System (CIDS) through the CFDS
3. Fault Confirmation
__________________
A. Do the CIDS-BITE test through the CFDS (Ref. AMM TASK 23-73-00-740-005).
4. Fault Isolation
_______________
A. If the test gives a different maintenance message, do the trouble
shooting procedure related to the maintenance message.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : 001-049, 051-099, 101-105, 151-199, ∞∞23-73-00∞∞∞∞∞∞∞∞∞∞Page B234
201-299, Aug 01/05R
CES
TASK 23-73-00-810-901
Spurious Crew Buzzer activation in the cockpit
1. Possible Causes
_______________
- DIR-CIDS, 1 (101RH)
- DIR-CIDS, 2 (102RH)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-73-34-000-001 Removal of the CIDS Director (101RH,102RH) AMM 23-73-34-400-001 Installation of the CIDS Director (101RH,102RH) ASM 23-73/03
3. Fault Confirmation
__________________
A. Do the CIDS 1 (ACT) DIRECTOR test and the CIDS 2 (PAS) DIRECTOR test through the CFDS.
4. Fault Isolation
_______________
A. If the test gives a different maintenance message, do the trouble
shooting procedure related to the maintenance message.
B. Maintenace Action
(1) If the fault message DIRECTOR 1 or DIRECTOR 2 is shown on the CFDS:
- replace the DIR-CIDS, 1 (101RH) and/or DIR-CIDS, 2 (102RH) (Ref. AMM TASK 23-73-34-000-001) and (Ref. AMM TASK 23-73-34-400-001).
(2) If no fault message is shown on the CFDS:
- do a check and repair the wiring between the DIR-CIDS1 connector 101RH-AB/A13 and the FWC1 connector 1WW1-AA/7J DIR-CIDS1 connector 101RH-AB/A13 and the FWC2 connector 1WW2-AA/7J DIR-CIDS2 connector 102RH-AB/A13 and the FWC1 connector 1WW1-AA/7J DIR-CIDS2 connector 102RH-AB/A13 and the FWC2 connector 1WW2-AA/7J (Ref. ASM 23-73/03).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 COMMUNICATIONS 通讯2(128)