- replace the VIDEO PUSHSWITCH (16RA).
(a) If the fault continues:
- do a check and if necessary repair the wiring between the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), and the VIDEO PUSHSWITCH (16RA).
C. If the images for cameras 1, 2 and 3 are bad/distorted/too dim/too bright MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA):
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
D. If the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) does not go into the power-down-mode:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
E. If the incorrect images are shown on the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) when the power-down-mode is excited:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
F. If the images from camera 1 do not show on the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) when cockpit entry is requested:
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
(1) If the fault continues:
- do a check and if necessary repair the wiring between the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) and the COCKPIT SYST.CONTROL. (24MQ).
(2) If the fault continues:
- do the test of the Cockpit Door Lock System (Ref. AMM TASK 52-51-00-710-002). Make sure that the images from camera 1 show on the screen of the LCD monitor when cockpit entry is requested.
(a) If the images from camera 1 do not show when cockpit entry is requested:
- do the related trouble shooting for the cockpit door lock system. You must do the trouble shooting to make sure that there is a signal from the COCKPIT SYST.CONTROL. (24MQ) to the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA) when cockpit access is requested.
G. If the failure history is not correctly shown on the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA):
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
H. If the failure history cannot be deleted from the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA):
- replace the MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA), (Ref. AMM TASK 23-72-22-000-001) and (Ref. AMM TASK 23-72-22-400-001).
J. Do the test given in Para. 3.
**ON A/C 216-216,
TASK 23-72-00-810-808 LCD Monitor Failure
1. Possible Causes
_______________
- MONITOR-COCKPIT DOOR SURVEILLANCE SYSTEM (10RA)
- CAMERA-COCKPIT DOOR (12RA)
- CAMERA-DR 1, LH (13RA)
- CAMERA-DR 1, RH (14RA)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 23-72-00-740-001 BITE Test of the Anti-Hijack Camera-Monitoring-System AMM 23-72-22-000-001 Removal of the Monitor (10RA) AMM 23-72-22-400-001 Installation of the Monitor (10RA) AMM 23-72-51-000-001 Removal of the Anti-Hijack-System Cameras AMM 23-72-51-400-001 Installation of the Anti-Hijack-System Cameras ASM 23-72/01
3. Fault Confirmation
__________________ **ON A/C 216-216, Post SB 23-1208 For A/C 216-216,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320 Trouble Shooting Manual 排故手册 COMMUNICATIONS 通讯2(34)