Flap Track and Beam 1
Figure 003
R 1EFF : 001-049, 051-061, 101-103, 201-203, 1 57-51-00Page 10 1301-399, 1May 01/05 1 1 1CES 1R **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
(Ref. Fig. 003A)
G. Flap Beam and Track 1
The flap beam and track 1 is attached at two positions:
-
a forward attachment
-
a rear attachment.
Bolts attach the forward attachment to the aircraft structure and,
through a link, to the flap beam and track. Bolts attach the aft
attachment to the aircraft structure and, through a machined lug, to the
flap beam and track.
The flap beam and track is a titanium assembly, with a machined roller track at each side. A flap actuating lever at the forward end of the beam has a limit stop. A bush assembly at the rear end of the beam is the limit stop for the flap carriage.
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 004)
H. Flap Beams and Tracks 2, 3 and 4
The flap beams and tracks 2, 3 and 4 are attached at two positions:
-
a forward attachment
-
a rear attachment.
(1)
Forward attachment
The forward attachment of each flap beam and track includes a pin which is installed in a bearing and the fail-safe spigot. Brackets attach the bearing and the fail-safe spigot to the bottom skin panel (Ref. 57-26-00).
(2)
Rear attachment
The rear attachment of each flap beam and track includes bolts, a spigot and a fail-safe spigot, that go through bearing pads on the bottom skin panel.
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-51-00Page 11 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Flap Track and Beam 1
Figure 003A
R 1EFF : 062-099, 104-149, 151-199, 204-299, 1 57-51-00Page 12 1401-499, 1Aug 01/05 1 1 1CES 1
Flap Tracks and Beams 2, 3 and 4
Figure 004
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-51-00Page 13 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 The flap beams and tracks 2, 3 and 4 are box-type assemblies. An aft top member, which is the flap carriage track, is machined from extruded titanium. The beams have titanium webs and stops, extruded-titanium angles and channels and a forged aluminum alloy flange. Aluminum alloy diaphragms and angles are installed between the webs.
**ON A/C 301-399,
(Ref. Fig. 004A)
H. Flap Beams and Tracks 2, 3 and 4
The flap beams and tracks 2, 3 and 4 are attached at two positions:
-
a forward attachment
-
a rear attachment.
(1)
Forward attachment
The forward attachment of each flap beam and track has a spigot and a failsafe pin. A bearing bracket, mounted on the wing bottom skin panel, holds the spigot. The failsafe pin connects a bracket mounted on the flap beam to a catching bracket on the bottom skin panel (Ref. 57-26-00).
(2)
Rear attachment
The rear attachment of each flap beam and track has a failsafe spigot and an aft spigot pin. These go through an outer bracket mounted on the wing bottom skin panel. Bolts and screws hold two bearing pads to the top face of the beam, and attach the beam to the outer bracket (Ref. 57-26-00).
The flap beams and tracks 2, 3 and 4 are box-type assemblies. An aft top member, which is the flap carriage track, is machined from extruded titanium. The beams have titanium webs and stops, extruded-titanium angles and channels and a forged aluminum alloy flange. Aluminum alloy diaphragms and angles are installed between the webs.
1EFF : ALL 1 57-51-00Page 14 1 1 May 01/05R 1 1 1CES 1
R Flap tracks and beams 2, 3 and 4
R Figure 004A
1EFF : 301-399, 1 57-51-00 Page 15
1 1 May 01/04
1 1
1CES 1
TRAILING EDGE - INSPECTION/CHECK________________________________
TASK 57-51-00-200-001
Detailed Visual Inspection of Outer Wing Main Landing Gear Rear Pintle Pin
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
R R R R R CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINGS 机翼3(80)
