A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access panels of the AC/DC emergency power center 106VU and BATTERY power center 105VU.
(3)
Close the access doors 812 and 822.
(4)
Remove the warning notice(s).
(5)
Remove the access platform(s).
Subtask 24-38-51-862-051
B. De-energize the ground service network (Ref. TASK 24-42-00-862-001).
BATTERY (2PB1,2PB2) - INSPECTION/CHECK
______________________________________ TASK 24-38-51-280-001 Removal of the Batteries 1 and 2 for Restoration
1. Reason for the Job
__________________
Refer to the MPD TASK: 243851-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.8 m (5 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-38-51-000-001 Removal of the Batteries (2PB1, 2PB2) 24-38-51-400-001 Installation of the Batteries (2PB1, 2PB2) 24-42-00-861-001 Energize the Ground Service Network from the External
Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power CMM 243851
3. Job Set-up
__________ Subtask 24-38-51-861-050
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
Subtask 24-38-51-010-051
B. Get access to the Avionics Compartment
(1)
Put an access platform at the avionics compartment door 822.
(2)
Open the access door 822.
4. Procedure
_________ Subtask 24-38-51-020-051
A. Removal of the Batteries
(1)
Remove the batteries (Ref. TASK 24-38-51-000-001). Subtask 24-38-51-280-050
B. Checking
(1)
Check the batteries (Ref. CMM 243851) Subtask 24-38-51-420-051
C. Installation of the Batteries
(1) Install the batteries (Ref. TASK 24-38-51-400-001).
5. Close-up
________ Subtask 24-38-51-410-051
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the access door 822.
(3) Remove the access platform(s). Subtask 24-38-51-862-050
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
SHUNT - BATTERY (3PB1,3PB2) - REMOVAL/INSTALLATION
__________________________________________________
TASK 24-38-54-000-001
Removal of the Battery Shunt (3PB1, 3PB2)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific access platform 1.8 m (5 ft. 11 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power R 24-38-54-991-001 Fig. 401
3. Job Set-up
__________
Subtask 24-38-54-861-050
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001).
Subtask 24-38-54-941-050
B. Safety Precautions
(1)
In the cockpit, on the ELEC panel 35VU, release these pushbutton switches:
-
BAT 1,
-
BAT 2.
(2)
In the cockpit, on the ELEC panel 35VU, put a warning notice in position to tell persons not to operate the batteries.
Subtask 24-38-54-010-050
C. Get access to the Avionics Compartment
(1)
Put an access platform in position at the avionics compartment doors 812 and 822.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM ELECTRICAL POWER 电源2(61)
