-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
3. On the panel 35VU:
-release the BAT 1(2) pushbutton switch.
On the lower ECAM display unit:
-
the green DC BAT busbar indication comes into view,
-
the green line between the BAT 1(2) indication and the DC BAT busbar indication comes into view. The arrow points to the BAT 1(2) indication,
-
the related parameter indications (voltage and current) come into view in green.
After approximately 12 seconds, the green line between the BAT 1(2) indication and the DC BAT busbar indication:
-goes out of view if the battery charge is correct,
-stays in view if a battery charge is necessary.
On the panel 35VU:
-
the OFF legend of the BAT 1(2)pushbutton switch comes on.
On the lower ECAM display unit:
-
the green line between the BAT 1(2) indication and the DC BAT busbar indication goes out of view (if it was in view).
NOTE: If the BAT 1 and BAT 2 pushbutton switches are released simultaneously:
-
the white OFF indication comes into view,
-
the amber crosses come into view at the DC BAT busbar indication.
5. Close-up
________ Subtask 24-38-00-410-052
A. Close Access
(1)
Close the access panel of the BATTERY power center 105VU.
(2)
Close the access door 822.
(3) Remove the access platform(s). Subtask 24-38-00-860-053
B. Put the aircraft back to its initial configuration.
(1)
Do the EIS stop procedure
(Ref. TASK 31-60-00-860-002).
(2)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
DC GENERATION - BATTERIES - INSPECTION/CHECK
____________________________________________
TASK 24-38-00-210-001
Visual Inspection of the Batteries (2PB1, 2PB2)
1. Reason for the Job
__________________
Examination of the batteries.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) No specific cloth No specific warning notice No specific wet sponge No specific access platform 1.8 m (5 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific acetic acid
Material No. 19-010 USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM ELECTRICAL POWER 电源2(55)