R 1EFF : ALL 1 24-92-00Page 421 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 24-92-00-010-076
B. Get Access
(1)
Make sure that these access panels are removed:
(a)
For the left pylon:
-414FR, 414CR, 414AR
(b)
For the right pylon:
-424ER, 424CR, 424AR, 423FL
(c)
For the left wing:
-521BT, 521EB, 521CB, 521AB
(d)
For the right wing:
-621BT, 621EB, 621CB, 621AB
(2)
Make sure that the FWD cargo-compartment door 825AR is open (Ref. TASK 52-30-00-860-001).
(3)
Make sure that the access platform is in position at the access door 825AR.
(4)
In the zone 131, make sure that these sidewall and partition panels are removed (Ref. TASK 25-54-12-000-003) and (Ref. TASK 25-54-12-000-001):
(a)
For the left IDG feeders:
-131PW, 131MW
(b)
For the right IDG feeders:
-132PW, 132MW
R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 24-92-00Page 422 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,
Subtask 24-92-00-010-076-B
B. Get Access
(1)
Make sure that these access panels are removed:
(a)
For the left pylon:
-414FR, 414CR, 414AR
(b)
For the right pylon:
-424ER, 424CR, 424AR, 423FL
(c)
For the left wing:
-521BT, 521EB, 521CB, 521AB
(d)
For the right wing:
-621BT, 621EB, 621CB, 621AB
(2)
Make sure that the FWD cargo-compartment door 825AR is open (Ref. TASK 52-30-00-860-001).
(3)
Make sure that the access platform is in position at the access door 825AR.
(4)
In the zone 131, make sure that these sidewall and partition panels are removed (Ref. TASK 25-54-12-000-003) and (Ref. TASK 25-54-12-000-001):
(a)
For the left IDG feeders:
-131PW, 131SW
(b)
For the right IDG feeders:
-132PW, 132SW
R 1EFF : 151-199, 401-499, 1 24-92-00Page 423 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
Subtask 24-92-00-010-076-A
B. Get Access
(1)
Make sure that these access panels are removed:
(a)
For the left pylon:
-414FR, 414CR, 414AR
(b)
For the right pylon:
-424ER, 424CR, 424AR, 423FL
(c)
For the left wing:
-521BT, 521EB, 521CB, 521AB
(d)
For the right wing:
-621BT, 621EB, 621CB, 621AB
(2)
Make sure that the FWD cargo-compartment door 825AR is open (Ref. TASK 52-30-00-860-001).
(3)
Make sure that the access platform is in position at the access door 825AR.
(4)
In the zone 131, make sure that these sidewall and partition panels are removed (Ref. TASK 25-54-12-000-003) and (Ref. TASK 25-54-12-000-001):
(a)
For the left IDG feeders:
-131PW, 131RW
(b)
For the right IDG feeders:
-132PW, 132RW
R 1EFF : 301-399, 1 24-92-00Page 424 1 1 Aug 01/05 1 1 1CES 1
**ON A/C ALL
4. Procedure_________
R (Ref. Fig. 402/TASK 24-92-00-991-042-A)
Subtask 24-92-00-420-053
A. Installation of the IDG feeder cables
R CAUTION : BE CAREFUL NOT TO CAUSE DAMAGE TO THE IDG FEEDERS WHEN YOU_______
R REMOVE/INSTALL THEM.
(1) Put the feeder cables in position in the cargo compartment, the wing
and the pylon.
(2) Connection of the feeder cables on the right side of the pylon:
R (a) Install the electrical feeder cables on the terminal block (25)
R with the nuts (26) (Ref. AWM 242201) or (Ref. AWM 242202).
R (b) Tighten the nuts (26) (Ref. ESPM 204452).
R
R (c) Install the cover (24) with the screws (23) on the terminal block
R (25).
R (d) Tighten the screws (23) and safety with new MISCELLANEOUS
R (Material No. 19-010) (22).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM ELECTRICAL POWER 电源2(147)