A320飞机维护手册 AMM ELECTRICAL POWER 电源1(83)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Installation of the Integrated Drive Generator -IDG 1(2),(4000XU)
 WARNING : DO NOT GET ENGINE OIL ON YOUR SKIN FOR A LONG TIME. FLUSH THE OIL
_______ FROM YOUR SKIN WITH WATER. THE OIL IS POISONOUS AND CAN GO THROUGH YOUR SKIN AND IN TO YOUR BODY.
 CAUTION : DO NOT LET ENGINE FUEL OR OIL FALL ON THE ENGINE. UNWANTED FUEL OR
_______ OIL MUST BE REMOVED IMMEDIATELY WITH A CLEAN LINT FREE CLOTH. THE FUEL OR OIL CAN CAUSE DAMAGE TO THE SURFACE PROTECTION AND TO SOME PARTS.
 CAUTION : DO NOT USE THE IDG CABLES FOR A HAND HOLD. IF THE IDG CABLES ARE
_______ PULLED LOOSE IT CAN CAUSE DAMAGE TO THE CABLES OR TO THE ENGINE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint free cloth No specific warning notice No specific Torque Wrench : range 2.00 to 26.00 lbf.ft
 (0.20 to 3.60 m.daN) No specific Torque Wrench : range 8.00 to 75.00 lbf.ft
 (1.00 to 10.00 m.daN) No specific Torque Wrench : range 15.00 to 150.00 lbf.ft
 (2.00 to 20.00 m.daN) No specific Torque Wrench : range 5.00 to 35.00 lbf.in
 (0.05 to 0.40 m.daN) No specific Torque Wrench : range 96.00 to 900.00 lbf.in
 (1.00 to 10.00 m.daN) S387IDG 1 HOIST - ACCESSORY, IDG R/I FOR CFM56-5 TMHSD10-20-00 1 HOIST - ACCESSORY, IDG R/I FOR CFM56-5
 1EFF : ALL 1 24-21-51Page 416 1 1 Aug 01/05R 1 1 1CES 1

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. CP8002  * Lockwire CRS 0.032in. (0.8mm) dia (Ref. 70-30-00)
 Material No. 03-002  GB DEF-STAN 91-101
 LUBRICATING OIL TURBINE ENGINE SYNT BASE
 (Ref. 20-31-00)

 Material No. 11-002  USA MIL-PRF-680
 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
 (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
2 packing 24-21-51 05 -030 5 packing 24-21-51 05 -060 15 packing 24-21-51 05 -080 17 packing 24-21-51 05 -100 42 O-ring 24-21-51 03 -010 44 O-ring 24-21-51 03 -020
 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
12-13-24-612-041 IDG Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check 24-21-00-710-040 Operational Test of the IDG Disconnect and Reconnect
 (Reset) Function - Engine Static 24-21-00-730-040 System Test of the IDG Frequency (P/N 740119) 24-21-41-000-040 Removal of the Quick Attach/Detach (QAD) Adapter of
 the IDG (4000XU)
 24-21-51-000-040 Removal of the Integrated Drive Generator -IDG

 1(2),(4000XU)
 71-13-00-010-040 Opening of the Fan Cowl Doors
 71-13-00-410-040 Closing of the Fan Cowl Doors
 24-21-51-991-300 Fig. 401

R 24-21-51-991-301 Fig. 403 -------------------------------------------------------------------------------

REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
R 24-21-51-991-302 Fig. 405 R 24-21-51-991-303 Fig. 406
 3. Job Set-up
__________
 Subtask 24-21-51-860-054
 A. Aircraft Maintenance Configuration
 (1)
 On the center pedestal, on the ENG panel 115VU, make sure that a warning notice is in position to tell persons not to start the engine.

 (2)
 On the overhead maintenance panel 50VU, make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off. Make sure that a warning notice is in position to tell persons not to energize the FADEC 1(2).

 Subtask 24-21-51-865-057
 B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 1000EM1, 4000XU
 122VU ELEC/GCU/1 2XU1 T26
 122VU ELEC/IDG1/DISC 1XT T24
 FOR 1000EM2, 4000XU 122VU ELEC/GCU/2 2XU2 T27 122VU ELEC/IDG2/DISC 2XT T25
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM ELECTRICAL POWER 电源1(83)