A320飞机维护手册 AMM LIGHTS 灯光1(81)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 5. On the FAP 120RH: - push the MAIN OFF membrane switch. In the cabin:- all the reading lights go off.
 NOTE : The general illumination goes off if it is on.____
 On the FAP 120RH: - the integral light of the POWER READ membrane switch goes off.
 **ON A/C ALL
 Subtask 33-25-00-740-050 
R  B. BITE test of the Passenger Reading Light System through PTP
 (1) Do the BITE test of the passenger reading lights and the cabin attendant work-lights on the programming and test panel 110RH (Ref. TASK 33-27-00-710-001). 
R  Subtask 33-25-00-740-051 
R  C. BITE test of the Passenger Reading Light System through MCDU 
R R R  (1) Do the BITE test of the passenger reading lights and the cabin attendant work-lights on the Multipurpose Control and Display Unit (MCDU) 3CA (Ref. TASK 33-27-00-740-001).
 5. Close-up________
 Subtask 33-25-00-862-050
 A. Put the aircraft back to the serviceable condition.
 (1) De-energize the CIDS (Ref. TASK 23-73-00-862-001).
 (2) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 

 TASK 33-25-00-820-001 Adjustment of the Passenger Reading Lights
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
8PE004363-10  1 ADJUSTING DEVICE
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
23-73-00-861-001  Energize the Cabin Intercommunication Data System (CIDS) 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
 3. Job Set-up
__________ Subtask 33-25-00-861-051
 A. Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002).

 1EFF : ALL 1 33-25-00Page 506 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 33-25-00-865-051

 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2000VU PASSENGER READING LIGHT 1LW G1 2000VU PASSENGER READING LIGHT 2LW G2 2000VU PASSENGER READING LIGHT 3LW G3 2000VU PASSENGER READING LIGHT 4LW G4 2000VU PASSENGER READING LIGHT 5LW G5 2000VU PASSENGER READING LIGHT 6LW G6
 Subtask 33-25-00-010-050
 C. Get Access
 CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
 (1) Carefully remove the lens from the reading light.
 Subtask 33-25-00-480-050
 D. Install the ADJUSTING DEVICE to the housing of the reading light and turn it clockwise to lock it.
 Subtask 33-25-00-860-051
 E. Aircraft Maintenance Configuration
 (1)
 Make sure that the Cabin Intercommunication Data System (CIDS) is energized (Ref. TASK 23-73-00-861-001).

 (2)
 On the FWD Attendant Panel (FAP) 120RH push the membrane switches MAIN ON and POWER READ.

 

 4. Procedure
_________

 Subtask 33-25-00-820-050
 A. Adjustment of the Passenger Reading Lights
 (1)
 On the combi-panel 2040VU/2041VU push the related membrane switch of the reading light.

 (2)
 Make sure that the reading light comes on.

 (3)
 Adjust the reading light beam to the center of the leading edge from the related seat with the ADJUSTING DEVICE.

 NOTE : Do not adjust the angle of the reading light beam more than 20
____
 degrees in any direction.

 (4)
 On the combi-panel 2040VU/2041VU push the related membrane switch of the reading light.

 (5)
 Make sure that the reading light goes off.

 5. Close-up
________ Subtask 33-25-00-080-050
 A. Turn the ADJUSTING DEVICE counterclockwise to release it and remove it from the reading light.
 Subtask 33-25-00-410-050
 B. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光1(81)