• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:04来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  (2) Install and tighten the four screws (30). 
R  (3) Install and tighten the four screws (26).
 Subtask 33-13-41-865-052 
R  H. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 4LF
 Subtask 33-13-41-710-050 
R  J. Do the operational test (Ref. TASK 33-13-00-710-001).
 5. Close-up________
 Subtask 33-13-41-942-050
 A. Make sure that the work area is clean and clear of tool(s) and other items.

 

 CONTROLLER - LIGHTING (6LF,16LF,30LF) - REMOVAL/INSTALLATION
____________________________________________________________ TASK 33-13-51-000-001 Removal of the Lighting Controller (6LF, 16LF, 30LF)
 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps No specific circuit breaker(s) safety clip(s) FOR FIN 6LF No specific ALLEN wrench FOR FIN 16LF, 30LF No specific access platform 1.5 m (4 ft. 11 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-13-51-991-001 Fig. 401


 3. Job Set-up__________
 Subtask 33-13-51-865-050
 A. Open, safety and tag this(these) circuit breaker(s):
R R R R R R  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 6LF 122VU LIGHTING/INSTL LT/OVHD/PNL 3LF Y03 FOR 16LF 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04 FOR 30LF 122VU LIGHTING/INSTL LT/GLARE/SHLD 5LF Y05
 Subtask 33-13-51-010-050
 B. Get Access
 (1) FOR 16LF, 30LF Put the access platform in position at the zone 121.
 (2) Open the access door 811. FOR 16LF, 30LF 811
 (3) FOR 6LF Remove the ceiling panel 211HC with an ALLEN wrench.
 4. Procedure_________
 (Ref. Fig. 401/TASK 33-13-51-991-001)
 Subtask 33-13-51-020-050
 A. Removal of the Lighting Controller
 (1) Disconnect the connector (4).
 (2) Remove the four screws (3) and the lockwashers (2). During this operation, hold the lighting controller (1).
 (3) Remove the lighting controller (1).
 (4) Put blanking caps on the connectors (4) and (5).

 

 Lighting Controller
 Figure 401/TASK 33-13-51-991-001
 1EFF :  ALL  1  33-13-51 Page 403 
1  1  Feb 01/98
 1  1
 1CES  1

 

 TASK 33-13-51-400-001
 Installation of the Lighting Controller (6LF, 16LF, 30LF)
 1. Reason for the Job__________________
 Self Explanatory
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
FOR FIN 6LF No specific FOR FIN 16LF, 30LF No specific  ALLEN wrenchaccess platform 1.5 m (4 ft. 11 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-13-00-710-001  Operational Test of the Instrument and Panel Integral Lighting
 3. Job Set-up__________
 Subtask 33-13-51-865-051
 A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
R R R R R R  -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------FOR 6LF 122VU LIGHTING/INSTL LT/OVHD/PNL 3LF Y03 FOR 16LF 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04 FOR 30LF 122VU LIGHTING/INSTL LT/GLARE/SHLD 5LF Y05

 

 Subtask 33-13-51-010-051
 B. Get Access
 (1)
 FOR 16LF, 30LF Make sure that the access platform is in position at the zone 121.

 (2)
 Make sure that the access door 811 is open.
 FOR 16LF, 30LF
 811


 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LIGHTS 灯光1(42)