• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:04来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 

 


 Service Area Light
 Figure 402/TASK 33-31-11-991-002

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 33-31-11Page 416 1201-224, 1May 01/05 1 1 1CES 1


 Service Area Light
 Figure 402A/TASK 33-31-11-991-002-A

R 1EFF : 106-149, 225-299, 301-399, 401-499, 1 33-31-11Page 417 1 1 Aug 01/05 1 1 1CES 1

 

R **ON A/C 106-149, 225-299, 301-399, 401-499,

 Subtask 33-31-11-020-051-A
 A. Removal of the Service Area Light
 (1)
 Remove the screws (1) with the washers (2) and hold the service area light (3) to get access to the electrical connectors (5) an (6).

 (2)
 Disconnect the electrical connectors (5) and (6).

 (3)
 Put blanking caps on the disconnected electrical connectors.

 (4)
 Remove the service area light (3).


R 1EFF : 106-149, 225-299, 301-399, 401-499, 1 33-31-11Page 418 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL

 

 TASK 33-31-11-400-002
 Installation of the Service Area Light 4LJ (5LJ)

 1.
 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) R No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 05-002  USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00) Material No. 09-003 C Z-16.115 SEALANT,POLYSULFIDE (USE 09-018) (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
9 seal  33-31-11 01 -030


 D. Referenced Information -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------33-31-00-710-001 Operational Test of the Service Area Lighting **ON A/C 001-049, 051-099, 101-105, 151-199, 201-224,
 33-31-11-991-002 Fig. 402 R **ON A/C 106-149, 225-299, 301-399, 401-499,
 33-31-11-991-002-A Fig. 402A
 **ON A/C ALL
 3. Job Set-up
__________
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-224,

 Subtask 33-31-11-865-053
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU LIGHT SEC 19 1LJ D07

R **ON A/C 106-149, 225-299, 301-399, 401-499,
 Subtask 33-31-11-865-053-A
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU LIGHT SEC 19 1LJ E07 Subtask 33-31-11-860-051


 B. Aircraft Maintenance Configuration
 (1)
 Make sure, that the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE is in position below the access door at zone 312.

 (2)
 Make sure, that the access door 312AR is open.


 (3) Make sure, that the switch 3LJ at zone 312 is in the OFF position. **ON A/C ALL
 4. Procedure
_________
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-224,

 (Ref. Fig. 402/TASK 33-31-11-991-002) R **ON A/C 106-149, 225-299, 301-399, 401-499,
 (Ref. Fig. 402A/TASK 33-31-11-991-002-A)
 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-224,

 Subtask 33-31-11-910-051
 A. Preparation for Installation
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 Apply the SEALANTS (Material No. 09-003) to the mating surface of the service area light (4).

 (4)
 Apply the SPECIAL MATERIALS (Material No. 05-002) to the washers (5) and the screws (6).
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LIGHTS 灯光1(107)