(2)
Remove the bulb (2) from the cover (3). To do this, pull the bulb.
Console and Briefcase Light
Figure 401/TASK 33-12-15-991-001
1EFF : ALL 1 33-12-15 Page 403
1 1 Feb 01/98
1 1
1CES 1
TASK 33-12-15-400-001
Installation of the Console and Briefcase Light (17LE, 18LE, 19LE, 20LE, 21LE, 22LE, 23LE, 24LE)
CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 bulb 33-12-15 01 -010
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-00-710-001 Operational Test of the General Illumination 33-12-15-991-001 Fig. 401
3. Job Set-up
__________ Subtask 33-12-15-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU LIGHTING/FLOOD/F/O/SIDE 4LE Z06 122VU LIGHTING/FLOOD/CAPT/SIDE 5LE Z05
Subtask 33-12-15-941-050
B. Aircraft Maintenance Configuration
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
4. Procedure
_________ (Ref. Fig. 401/TASK 33-12-15-991-001) Subtask 33-12-15-420-050
A. Installation of the Light
(1)
Install the bulb (2) NOTE : Make sure that the bulb (2) is in the correct position in the
____
cover (3).
(2)
Put the cover (3) in position in the housing (1).
NOTE : Make sure that the cover (3) is locked correctly.
____ Subtask 33-12-15-865-052
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5LE, 4LE
Subtask 33-12-15-710-050
C. Test
(1) Do the operational test of the light (Ref. TASK 33-12-00-710-001).
5. Close-up
________ Subtask 33-12-15-942-050
A. Aircraft Maintenance Configuration
(1) Make sure that the work area is clean and clear of tool(s) and other items.
RHEOSTAT - FLOODLIGHT (28LE,35LE) - REMOVAL/INSTALLATION
________________________________________________________
TASK 33-12-17-000-001
Removal of the Rheostat - Flood Light (28LE, 35LE)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-17-991-001 Fig. 401
3. Job Set-up
__________ Subtask 33-12-17-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU LIGHTING/EMER LT/CKPT/DOME 1LE H08 122VU LIGHTING/FLOOD/CTR INST/PNL 2LE Z04
4. Procedure
_________
(Ref. Fig. 401/TASK 33-12-17-991-001) Subtask 33-12-17-020-050
A. Removal of the Pedestal Flood-Light Rheostat (28LE)
(1)
Loosen the two fasteners (2).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光1(35)
