1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-31-11-991-004 Fig. 404
3. Job Set-up
__________ Subtask 33-31-11-865-056
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU LIGHT SEC 19 1LJ E07
Subtask 33-31-11-010-053
B. Get Access
(1)
Put a warning notice in the cockpit to tell persons not to operate the flight controls.
(2)
Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone
312.
R 1EFF : 106-149, 225-299, 301-399, 401-499, 1 33-31-11Page 430 1 1 Aug 01/05 1 1 1CES 1
(3)
Open the access door 312AR
(4)
Set the switch 3LJ at zone 312 to the OFF position.
4. Procedure
_________
(Ref. Fig. 404/TASK 33-31-11-991-004) Subtask 33-31-11-020-053
A. Removal of the Lamp of the Service Area Light
(1)
Loosen the captive screws (5).
(2)
Remove the cover assembly (4) from the housing (1). NOTE : The lens is bonded in the cover assembly and cannot be
____ replaced.
(3) Remove the lamp (3) from the light assembly (2) and discard the lamp.
R 1EFF : 106-149, 225-299, 301-399, 401-499, 1 33-31-11Page 431 1 1 Aug 01/05 1 1 1CES 1
Service Area Light
Figure 404/TASK 33-31-11-991-004
R 1EFF : 106-149, 225-299, 301-399, 401-499, 1 33-31-11Page 432 1 1 Aug 01/05 1 1 1CES 1
TASK 33-31-11-400-004
Installation of the Lamp of the Service Area Light 4LJ (5LJ)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-31-00-710-001 Operational Test of the Service Area Lighting 33-31-11-991-004 Fig. 404
3. Job Set-up
__________ Subtask 33-31-11-865-057
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL SERVICE IDENT. LOCATION -------------------------------------------------------------------------------2001VU LIGHT SEC 19 1LJ E07
R 1EFF : 106-149, 225-299, 301-399, 401-499, 1 33-31-11Page 433 1 1 Aug 01/05 1 1 1CES 1 Subtask 33-31-11-860-053
B. Aircraft Maintenance Configuration
(1)
Make sure, that the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE is in position below the access door at zone 312.
(2)
Make sure, that the access door 312AR is open.
(3)
Make sure, that the switch 3LJ at zone 312 is in the OFF position.
4. Procedure
_________
(Ref. Fig. 404/TASK 33-31-11-991-004) Subtask 33-31-11-910-053
A. Preparation for Installation
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光1(110)
