(e)
Use the INSERTION/REMOVAL TOOL to disconnect the electrical connectors (11).
(f)
Remove the screws (2), the washers (1) and the nuts (13) from the bracket (14).
(g)
Remove the loading-area light-housing (10).
(h)
Remove the flange assembly (3).
(2)
Removal of the Bulb of the Loading-Area Light
(Ref. Fig. 402/TASK 33-34-12-991-002)
(a)
Loosen the screw (1) of the clamping ring (2).
(b)
Remove the clamping ring (2) together with the sealing (3) and the lens (4).
Removal/installation of the Loading-Area Light Figure 401/TASK 33-34-12-991-001
1EFF : 1 1R 1CES ALL 1 11 1 33-34-12 Page 404 Feb 01/00
Removal/Installation of the Bulb of the Loading-Area Light
Figure 402/TASK 33-34-12-991-002
(c) Remove the bulb (5) from the loading-area light housing (6).
R **ON A/C 151-199, 401-499,
Subtask 33-34-12-020-050-A
A. Removal of the Loading-Area Light (11LU, 12LU)
(Ref. Fig. 403/TASK 33-34-12-991-003)
(1)
Removal of the FWD Loading-Area Light
(a)
Remove the screws (7) from the access panel (6).
(b)
Remove the access panel (6).
(c)
Remove the screws (9), the washers (8) and the nuts (12).
(d)
Remove the bracket assembly (5) and the gasket (4).
(e)
Use the INSERTION/REMOVAL TOOL (M81969-14-02) to disconnect the electrical connectors (11).
(f)
Remove the screws (2), the washers (1) and the nuts (13) from the bracket (14).
(g)
Remove the loading-area light-housing (10).
(h)
Remove the flange assembly (3).
(2)
Removal of the AFT Loading-Area Light
(a)
Remove the screws (32), and the spacers (31) from the bracket assembly (21).
(b)
Carefully lower the loading-area light-housing (30) from the bracket assembly (21).
NOTE : The loading-area light-housing is secured by a lanyard.
____
(c)
Use the INSERTION/REMOVAL TOOL (M81969-14-02) to disconnect the electrical connectors (33).
(d)
Remove the screw (27), the washers (28) and the nut (34) from the lanyard and remove the loading-area light-housing (30).
(e)
Remove the access panel (22).
Removal/Installation of the Loading-Area Light
Figure 403/TASK 33-34-12-991-003
R 1EFF : 151-199, 401-499, 1 33-34-12Page 407 1 1 Aug 01/05 1 1 1CES 1
(f)
Remove the screws (35) from the access panel (22) and remove the bracket assembly (21).
(g)
Remove the screw (24), the washers (25) and the nut (26) from the bracket (23) and remove the lanyard (29).
(3) Removal of the Bulb of the Loading-Area Light (11LU, 12LU) (Ref. Fig. 402/TASK 33-34-12-991-002)
(a)
Loosen the screw (1) of the clamping ring (2).
(b)
Remove the clamping ring (2) together with the sealing (3) and the lens (4).
(c)
Remove the bulb (5) from the loading-area light housing (6).
R 1EFF : 151-199, 401-499, 1 33-34-12Page 408 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 33-34-12-400-001
Installation of the Loading-Area Light (11LU, 12LU)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2.5 m (8 ft. 2 in.)
M81969-14-02 1 INSERTION/REMOVAL TOOL
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power
24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光1(121)
