TASK 33-12-14-400-002
Installation of the Center Pedestal Light (27LE)
CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
2 bulb 33-12-14 01 -020
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-00-710-001 Operational Test of the General Illumination 33-12-14-991-001 Fig. 401
3. Job Set-up
__________ Subtask 33-12-14-865-054
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
122VU LIGHTING/FLOOD/CTR INST/PNL 2LE Z04
Subtask 33-12-14-941-050
B. Preparation for the Installation
(1)
Clean the component interface and/or the adjacent area.
(2)
Do an inspection of the component interface and/or the adjacent area.
4. Procedure
_________
(Ref. Fig. 401/TASK 33-12-14-991-001) Subtask 33-12-14-420-052
A. Installation of the Bulb in the Center Pedestal Light
(1) Install the bulb (2)
(2)
Install the lens (1) on the body of the light (3). Subtask 33-12-14-420-053
B. Installation of the Center Pedestal Light
(1)
Install the light (6) on the panel (7).
(2)
Install the circlips (4) on the light (6).
(3)
Connect the female electrical connectors (9) to the male electrical connectors (8).
(4)
Tighten the quick-disconnect fasteners (5) on the panel (7). Subtask 33-12-14-865-055
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 2LE
Subtask 33-12-14-710-051
D. Do the operational test of the Center Pedestal Light (Ref. TASK 33-12-00-710-001).
5. Close-up
________ Subtask 33-12-14-942-051
A. Make sure that the work area is clean and clear of tool(s) and other items.
LIGHT - CONSOLE AND BRIEFCASE (17LE,18LE,19LE,20LE,21LE,22LE,23LE,24LE)
_______________________________________________________________________ REMOVAL/INSTALLATION
____________________ TASK 33-12-15-000-001 Removal of the Console and Briefcase Light (17LE, 18LE, 19LE, 20LE, 21LE, 22LE,
23LE, 24LE)
CAUTION : DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
_______ THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
33-12-15-991-001 Fig. 401
3. Job Set-up
__________ Subtask 33-12-15-865-050
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------122VU LIGHTING/FLOOD/F/O/SIDE 4LE Z06 122VU LIGHTING/FLOOD/CAPT/SIDE 5LE Z05
4. Procedure
_________
(Ref. Fig. 401/TASK 33-12-15-991-001) Subtask 33-12-15-020-050
A. Removal of the Light
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光1(34)
