R R Integrally Lighted Identification Plate Figure 401/TASK 33-13-41-991-001- 12 (SHEET 1)
1EFF : 1 1 1CES ALL 1 111 33-13-41 Page 404 Nov 01/04
R R Integrally Lighted Identification Plate Figure 401/TASK 33-13-41-991-001- 22 (SHEET 2)
1EFF : 1 1 1CES ALL 1 111 33-13-41 Page 405 Nov 01/04
TASK 33-13-41-400-001
R Installation of the Integrally-Lighted Identification Plate
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-41-41-400-001 Installation of the Control Mechanism-Pitch Trim 33-13-00-710-001 Operational Test of the Instrument and Panel Integral
Lighting 76-11-41-400-040 Installation of the Throttle Control Lever Assembly 33-13-41-991-001 Fig. 401
3. Job Set-up
__________
Subtask 33-13-41-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04
4. Procedure
_________ R (Ref. Fig. 401/TASK 33-13-41-991-001) Subtask 33-13-41-420-054
A. Installation of the Integrally-Lighted Identification Plate 21LF
(1) Install the integrally-lighted identification plate (Ref. TASK 76-11-41-400-040).
Subtask 33-13-41-420-050
B. Installation of the Integrally Lighted Identification Plate 19LF, 20LF
(Ref. Fig. 401/TASK 33-13-41-991-001)
(1) Locate the integrally lighted identification plate (4).
(2) Install the screw (5).
(3) Install the indicator (2) and the wheel (1) (Ref. TASK 27-41-41-400-
001).
R Subtask 33-13-41-420-055
R C. Installation of the Integrally-Lighted Identification Plate (18LF)
R (1) Put the integrally-lighted identification plate (7) in position on
R the SWITCHING panel 8VU (8).
R (2) Install and tighten the four screws (6).
R (3) Tighten the four quarter-turn fasteners (9).
R Subtask 33-13-41-420-056
R D. Installation of the Integrally-Lighted Identification Plates (23LF and
R 24LF)
R (1) Put the integrally-lighted identification plates (11) and (15) in
R position on the FLOOD LT panel 112VU (12) and the FLOOD LT/INTEG LT
R panel 111VU (17).
R (2) Install and tighten the two screws (10) and (14).
R (3) Tighten the two quarter-turn fasteners (13) and (16).
R Subtask 33-13-41-420-057
R E. Installation of the Integrally-Lighted Identification Plate (26LF)
R (1) Put the integrally-lighted identification plate (20) in position on
R the ENG panel 115VU (19).
R (2) Install and tighten the three screws (21).
R (3) Tighten the four quarter-turn fasteners (18).
R Subtask 33-13-41-420-058
R F. Installation of the Integrally-Lighted Identification Plate (22LF)
R R (1) Put the integrally-lighted identification plate (24) in position on the RUD TRIM/PARKING BRK panel 110VU (23).
R (2) Install and tighten the four screws (25).
R (3) Tighten the four quarter-turn fasteners (22).
R Subtask 33-13-41-420-059
R R G. Installation of the Integrally-Lighted Identification Plates (35LF and 36LF)
R R (1) Put the integrally-lighted identification plates (28) and (29) in position on the GEAR panel (27).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LIGHTS 灯光1(41)
