• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 00:08来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 4. Procedure
_________
 Subtask 52-73-11-420-053
 A. Installation of the Proximity Switch
 (Ref. Fig. 405/TASK 52-73-11-991-004)

 (1)
 Install the proximity switch (2) on the support (3).

 (2)
 Install the washer (4) and the nut (5).


R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-73-11Page 446 1 1 May 01/05 1 1 1CES 1


 (3)
 Tighten the nut (5) and safety it with MISCELLANEOUS (Material No. 19-010).

 (4)
 Remove the blanking cap from the electrical connector (1).

 (5)
 Connect the electrical connector (1) to the proximity switch (2).


 (6) Adjust the proximity switch (2) (Ref. TASK 52-71-00-820-009). Subtask 52-73-11-865-061
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 48WV, 13WN, 15WN
 Subtask 52-73-11-710-056
 C. Operational Test
 (1) Do the operational test of the warning system of the emergency exit (Ref. TASK 52-73-00-710-002).
 5. Close-up
________ Subtask 52-73-11-410-064
 A. Installation of Lining Panel
 (1)
 Install the air outlet (7).

 (2)
 Install the insulation blanket.

 (3)
 Remove the blanking plugs from the disconnected connector (3). Connect the electrical connector of the SLIDE ARMED indicator-light.

 (4)
 Install the lining panel:
 FOR 6WN2
 242LW (Ref. TASK 25-23-47-400-002).
 FOR 6WN1
 241LW (Ref. TASK 25-23-47-400-002).

 

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-73-11Page 447 1 1 May 01/05 1 1 1CES 1 Subtask 52-73-11-420-064


 B. Arming of the Escape Slide of the Emergency Exit
 (Ref. Fig. 405/TASK 52-73-11-991-004)

 (1) Arm the escape slide of the emergency exits (10) as follows:
 (a) Turn the head of the latch pin (9) with a wrench a quarter turn clockwise to extend the latch pin (9).
 NOTE : The SLIDE ARMED indicator-light (11) comes on.
____
 (b) Install and close the flaps (8) on the emergency exits (10). NOTE : The SLIDE ARMED indicator-light (11) goes off.
____ Subtask 52-73-11-410-053
 C. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the applicable FWD passenger/crew door 831 or 841 (Ref. TASK 52-10-00-410-001).


 (3) Remove the access platform(s). Subtask 52-73-11-862-057
 D. De-energize the ground service network
 (Ref. TASK 24-42-00-862-001).

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-73-11Page 448 1 1 May 01/05 1 1 1CES 1R **ON A/C 301-399,


R TASK 52-73-11-400-004-B R Installation of the Proximity Switches (6WN1, 6WN2) of the Aft Emergency Exits R 1. Reason for the Job
__________________ R Self Explanatory R 2. Job Set-up Information
______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific Torque Wrench : range 0.20 to 3.60 m.daN
R (2.00 to 26.00 lbf.ft)

R B. Consumable Materials

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 19-010 USA AMS 5687
R LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
R (Ref. 20-31-00)

R C. Referenced Information

R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 24-42-00-861-001 R R 24-42-00-862-001 R R 52-22-00-410-002 R 52-22-00-860-004 R R 52-71-00-820-009 R Energize the Ground Service Network from the External Power De-energize the Ground Service Network Supplied from the External Power Closing of the Emergency Exit Doors from the Outside Special Precaution after Maintenance on the Door Damper and Emergency Operation Cylinder Adjustment of the Proximity Switches (5WN1, 5WN2, 6WN1, 6WN2) of the Emergency Exits
 1EFF : 301-399, 1 52-73-11Page 449 1 1 May 01/04 1 1 1CES 1


 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 52-73-00-710-002 R R 52-73-11-991-007 R FOR FIN 6WN1 R 25-23-47-400-013 R R R FOR FIN 6WN2 R 25-23-47-400-013 R R
R 3. Job Set-up
__________
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM DOORS 舱门8(80)