A320飞机维护手册 AMM DOORS 舱门8(101)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 31.975 | 31.991 | | | 31.945 | | | | OD 5 |(1.2588) |(1.2594) | | |(1.2576) | | | | | | | 0.009 | 0.050 | | | 0.110 | | | | | (0.0003)| (0.0019)| | |(0.0043)| | E | 32.000 | 32.025 | | | | 32.055 | | | ID 6 |(1.2598) |(1.2608) | | | |(1.2620) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-052
 C. Dimensional Check of the Aft Hinge Assembly
 (1) Between the outer dimension of the bush (6) and the inner dimension of the hinge assembly (7).
 1EFF : ALL 1 52-81-00Page 610 1 1 Feb 01/98 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 42.475 | 42.491 | | | 42.413 | | | | OD 6 |(1.6722) |(1.6728) | | |(1.6698) | | | | | | | 0.034 | 0.089 | | | 0.213 | | | | | (0.0013)| (0.0035)| | |(0.0083)| | E | 42.525 | 42.564 | | | | 42.626 | | | ID 7 |(1.6742) |(1.6757) | | | |(1.6781) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-053
 D. Dimensional Check of the Aft Hinge Assembly
 (1) Between the outer dimension of the bush (2) and the inner dimension of the fitting (4).
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 25.084 | 25.104 | | | 25.084 | | | | OD 2 |(0.9875) |(0.9883) | | |(0.9875) | | | | | | | -0.104 | -0.063 | | | 0.063 | | | | |-(0.0040)|-(0.0024)| | |(0.0024)| | E | 25.000 | 25.021 | | | | 25.021 | | | ID 4 |(0.9842) |(0.9850) | | | |(0.9850) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-054
 E. Dimensional Check of the Aft Hinge Assembly
 (1) Between the outer dimension of the flange bush (8) and the inner dimension of the fitting (1).
 1EFF : ALL 1 52-81-00Page 611 1 1 Feb 01/98 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 25.041 | 25.055 | | | 25.041 | | | | OD 8 |(0.9858) |(0.9864) | | |(0.9858) | | | | | | | -0.055 | -0.020 | | | 0.020 | | | | |-(0.0021)|-(0.0007)| | |(0.0007)| | E | 25.000 | 25.021 | | | | 25.021 | | | ID 1 |(0.9842) |(0.9850) | | | |(0.9850) | | -------------------------------------------------------------------------------
Subtask 52-81-00-220-055
 F. Dimensional Check of the Aft Hinge Assembly
 (1) Between the outer dimension of the bolt (9) and the inner dimension of the spacer (3).
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 15.966 | 15.984 | | | 15.932 | | | | OD 9 |(0.6285) |(0.6292) | | |(0.6272) | | | | | | | 0.016 | 0.052 | | | 0.120 | | | | | (0.0006)| (0.0020)| | |(0.0047)| | E | 16.000 | 16.018 | | | | 16.052 | | | ID 3 |(0.6299) |(0.6306) | | | |(0.6319) | | -------------------------------------------------------------------------------
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门8(101)