R 1EFF : ALL 1 52-71-00Page 566 1 1 May 01/05 1 1 1CES 1
5. Close-up
________ Subtask 52-71-00-410-059
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the access panel(s) 825AR and/or 826AR.
(3)
Remove the access platform(s).
(4)
Close the applicable cargo compartment door 825 or 826 (Ref. TASK 52-30-00-860-002).
Subtask 52-71-00-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ
Subtask 52-71-00-862-054
C. De-energize the aircraft electrical circuit (Ref. TASK 24-41-00-862-002).
R 1EFF : ALL 1 52-71-00Page 567 1 1 May 01/05 1 1 1CES 1 **ON A/C 301-399,
TASK 52-71-00-820-005
Adjustment of the Proximity Switches (59WV1,59WV2,61WV1,61WV2) of the Emergency Exits with the CHECKING TOOL-DOORS
1. Reason for the Job
__________________
There is an alternative method for this procedure. This task gives one of the methods. For the other method refer to the other task in this page block.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.2 m (10 ft. 6 in.) 355M03210000 1 CHECKING TOOL-DOORS
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
1EFF : 301-399, 1 52-71-00Page 568 1 1 May 01/05R 1 1 1CES 1
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
the External Power 52-22-00-010-002 Opening of the Emergency Exit Doors from the Outside 52-22-00-410-002 Closing of the Emergency Exit Doors from the Outside 52-22-00-860-003 Special Precaution before Maintenance on the Door
Damper and Emergency Operation Cylinder 52-22-00-860-004 Special Precaution after Maintenance on the Door
Damper and Emergency Operation Cylinder 52-71-00-710-001 Operational Test of the Door Warning System 52-71-00-991-011 Fig. 509
3. Job Set-up
__________
Subtask 52-71-00-861-055
A. Energize the ground service network
(Ref. TASK 24-42-00-861-001)
Subtask 52-71-00-010-064
B. Get Access
(1)
Put an access platform in position at the applicable emergency exit 834 or 843 or 833 or 844.
(2)
Open the applicable emergency exit 833 or 834 or 843 or 844 from the outside (Ref. TASK 52-22-00-010-002).
(3)
Obey the special precautions before you start work on the emergency exit (Ref. TASK 52-22-00-860-003).
1EFF : 301-399, 1 52-71-00Page 569 1 1 May 01/05R 1 1 1CES 1
Subtask 52-71-00-010-071
C. Removal of the Lining Panel
(1)
Remove the lining panel:
FOR 59WV1
231NX.
FOR 59WV2
232NX.
FOR 61WV1
251MX.
FOR 61WV2
252MX.
(2)
Remove the insulation blanket.
4. Procedure
_________ Subtask 52-71-00-820-061
A. Adjustment of the Proximity Switch
(Ref. Fig. 509/TASK 52-71-00-991-011)
WARNING : DO NOT OPEN THE EMERGENCY EXIT DURING THE ADJUSTMENT.
_______
(1)
Make sure that the emergency exits are closed.
(2)
Disconnect the electrical connector (1) from the proximity switch (2).
(3)
Connect the CHECKING TOOL-DOORS (355M03210000) to the electrical connector of the proximity switch (2).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门8(15)
