(2)
If necessary, discard the proximity switches
(a)
For 11WV1, 11WV2, 13WV1, 13WV2, 15WV1, 15WV2, 17WV1 and 17WV2: (Ref. TASK 52-71-11-000-001), (Ref. TASK 52-71-11-400-001).
(b)
For 25WV: (Ref. TASK 52-71-11-000-003), (Ref. TASK 52-71-11-400-003).
(c)
For 28WV and 34WV: (Ref. TASK 52-71-12-000-001), (Ref. TASK 52-71-12-400-001).
1EFF : ALL 1 52-71-00Page 607 1 1 Feb 01/05 1 1 1CES 1
(d)
For 30WV and 32WV: (Ref. TASK 52-71-12-000-002), (Ref. TASK 52-71-12-400-002).
(e)
For 19WV1, 19WV2, 21WV1 and 21WV2: (Ref. TASK 52-71-13-000-001), (Ref. TASK 52-71-13-400-001).
(f)
For 23WV, 36WV, 38WV and 40WV: (Ref. TASK 52-71-14-000-001), (Ref. TASK 52-71-14-400-001).
5. Close-up
________
Subtask 52-71-00-420-059
A. Installation of the Component
(1)
Put the insulation back in position.
(2)
Install the lining panels:
FOR 11WV1
221JW (Ref. TASK 25-23-45-000-005).
FOR 11WV2
222JW (Ref. TASK 25-23-45-000-002).
FOR 13WV1
831EZ, 831CZ (Ref. TASK 25-23-46-000-001).
FOR 13WV2
841EZ, 841CZ (Ref. TASK 25-23-46-000-001).
FOR 15WV1
261UW (Ref. TASK 25-23-45-000-003).
FOR 15WV2
262UW (Ref. TASK 25-23-45-000-004).
FOR 17WV1
832EZ 832CZ (Ref. TASK 25-23-46-000-002).
FOR 17WV2
842EZ 842CZ (Ref. TASK 25-23-46-000-002).
FOR 30WV, 32WV
825AR and/or 826AR, 826BR and 826CR
Subtask 52-71-00-865-080
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): FOR 11WV1, 11WV2, 13WV1, 13WV2, 15WV1, 15WV2, 17WV1, 17WV2 15WN, 13WN, 48WV FOR 25WV C/B NOT APPLICABLE FOR 28WV, 30WV, 32WV, 34WV 1MJ, 1GA
1EFF : ALL 1 52-71-00Page 608 1 1 Feb 01/05 1 1 1CES 1
FOR 19WV1, 19WV2, 21WV1, 21WV2
15WN, 13WN
FOR 23WV, 36WV, 38WV, 40WV
6HQ, 46WV
Subtask 52-71-00-410-094
C. Close Access
(1)
For 11WV1, 11WV2, 13WV1, 13WV2, 15WV1, 15WV2, 17WV1 and 17WV2:
(a)
Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).
(b)
Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.
(c)
Make sure that the work area is clean and clear of tool(s) and other items.
(d)
Close the passenger/crew door 831 or 841 or 832 or 842 (Ref. TASK 52-10-00-410-001).
(e)
Remove the access platform(s).
(2)
For 25WV:
(a)
Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.
(b)
Make sure that the work area is clean and clear of tool(s) and other items.
(c)
Close the passenger/crew door 831 or 841, (Ref. TASK 52-10-00-410-001).
(d)
Remove the access platform(s).
(3)
For 28WV and 34WV:
(a)
Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.
(b)
Make sure that the work area is clean and clear of tool(s) and other items. Remove the access platform(s).
1EFF : ALL 1 52-71-00Page 609 1 1 Feb 01/05 1 1 1CES 1
(4)
For 30WV and 32WV:
(a)
Make sure that the work area is clean and clear of tool(s) and other items.
(b)
Remove the access platform(s). Make sure that the cargo door is correctly closed (Ref. TASK 52-30-00-860-002).
(5)
For 19WV1, 19WV2, 21WV1 and 21WV2:
(a)
Make sure that the work area is clean and clear of tool(s) and other items.
(b)
Make sure that the cover flap is correctly installed on the emergency exit hatch (Ref. TASK 25-23-47-400-001).
(c)
Close the FWD and/or AFT passenger/crew door (Ref. TASK 52-10-00-410-001)
(6)
For 23WV, 36WV, 38WV and 40WV:
(a)
Make sure that the work area is clean and clear of tool(s) and other items.
(b)
Close the avionics compartment door :
For 36WN
811
For 23WV
812
For 38WV
822
For 40WV
824. (Ref. TASK 52-41-00-410-002)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门8(33)
