Trim Air Valve Figure 401/TASK 21-63-51-991-001- 12 (SHEET 1)
R 1EFF : 001-049, 051-061, 101-105, 151-152, 1 21-63-51Page 404 1201-204, 1May 01/05 1 1 1CES 1
Trim Air Valve Figure 401/TASK 21-63-51-991-001- 22 (SHEET 2)
R 1EFF : 001-049, 051-061, 101-105, 151-152, 1 21-63-51Page 405 1201-204, 1May 01/05 1 1 1CES 1
Trim Air Valve
Figure 401A/TASK 21-63-51-991-001-A12 (SHEET 1)
R 1EFF : 062-099, 106-149, 153-199, 205-299, 1 21-63-51Page 406 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Trim Air Valve
Figure 401A/TASK 21-63-51-991-001-A22 (SHEET 2)
R 1EFF : 062-099, 106-149, 153-199, 205-299, 1 21-63-51Page 407 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
(c)
Remove and discard the cable-ties (1) and remove the insulation (10).
(d)
Remove the nut (12), the washer (13), the screw (19), the washer
(20) and disconnect the bonding strap (21).
(e)
Remove the clamp (22) and move the duct assembly (11) upwards and away from the trim air valve (8).
(f)
Remove the O-ring (15).
(g)
Remove the clamp (14), the trim air valve (8) and the O-ring (15).
(h)
Put blanking plugs on the open ends of the duct flange (17), the trim air valve (8) and the duct assembly (11).
(2)
FOR 12HK
(a)
Disconnect the electrical connector (7).
(b)
Put blanking caps on the disconnected electrical connectors.
(c)
Remove and discard the cable-ties (1) and remove the insulation (3).
(d)
Remove the nut (12), the washer (13), the screw (19), the washer
(20) and disconnect the bonding strap (21).
(e)
Remove the clamp (22) and move the duct assembly (11) up and away from the trim air valve (6).
(f)
Remove the O-ring (15).
(g)
Remove the clamp (14), the trim air valve (6) and the O-ring (15).
(h)
Put blanking plugs on the open ends of the duct flange (16), the trim air valve (6) and the duct assembly (11).
(3)
FOR 13HK
(a)
Disconnect the electrical connector (5).
(b)
Put blanking caps on the disconnected electrical connectors.
1EFF : ALL 1 21-63-51Page 408 1 1 Feb 01/05R 1 1 1CES 1
(c)
Remove and discard the cable-ties (1) and remove the insulation (2).
(d)
Remove the nut (12), the washer (13), the screw (19), the washer
(20) and disconnect the bonding strap (21).
(e)
Remove the clamp (22) and move the duct assembly (11) up and away from the trim air valve (4).
(f)
Remove the O-ring (15).
(g)
Remove the clamp (14), the trim air valve (4) and the O-ring (15).
(h)
Put blanking plugs on the open ends of the duct flange (18), the trim air valve (4) and the duct assembly (11).
1EFF : ALL 1 21-63-51Page 409 1 1 Feb 01/05R 1 1 1CES 1
R
R
R
TASK 21-63-51-400-001
Installation of the Trim Air Valve (11HK,12HK,13HK)
WARNING : MAKE SURE THAT AIR IS NOT SUPPLIED TO THE AIR CONDITIONING SYSTEM
_______ FROM THE MAIN ENGINE, THE APU OR A GROUND SOURCE. HOT COMPRESSED AIR CAN CAUSE INJURY TO PERSONNEL.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2 m (6 ft. 7 in.)
No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)
B. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
1 cable-ties 21-63-03 07 -190 1 cable-ties 21-63-03 07A-190 15 O-rings 21-63-03 07 -110 15 O-rings 21-63-03 07A-110 FOR FIN 11HK 10 insulation 21-63-03 07 -180 10 insulation 21-63-03 07A-180 10 insulation 21-63-03 07A-180A FOR FIN 12HK 3 insulation 21-63-03 07 -170 3 insulation 21-63-03 07A-170 3 insulation 21-63-03 07A-170A FOR FIN 13HK 2 insulation 21-63-03 07 -160 2 insulation 21-63-03 07A-160 2 insulation 21-63-03 07A-160A C. Referenced Information
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AIR CONDITIONING 空调 5(156)
