-------------------------------------------------------------------------------
R PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------**ON A/C 106-149, 303-399,
R 122VU 4HH Y19
R **ON A/C 401-499,
R R R R R R R 122VU AIR COND/TEMP CTL SYS 2/CHAN A/115VAC 122VU AIR COND/TEMP CTL SYS 2/CHAN A/28VDC 122VU AIR COND/TEMP CTL SYS 1/CHAN A/115VAC 122VU AIR COND/TEMP CTL SYS 1/CHAN A/28VDC 122VU AIR COND/TEMP CTL SYS 2/CHAN B/28VDC 122VU AIR COND/TEMP CTL SYS 2/CHAN B/115VAC 122VU AIR COND/TEMP CTL SYS 1/CHAN B/115VAC 53HH 55HH 49HH 51HH 56HH 54HH 50HH W22 W21 X22 X21 Y21 Y20Y18
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 21-63-00-860-054
C. Aircraft Maintenance Configuration
(1) Pre-condition the Aircraft
WARNING : MAKE SURE THAT THE FWD AVIONICS ACCESS DOOR 811 IS OPEN._______ WITH A WARNING PLACARD ATTACHED TO IT. THE WARNING NOTICE MUST TELL PERSONS NOT TO CLOSE THE DOOR. THIS PREVENTS ACCIDENTAL PRESSURIZATION OF THE AIRCRAFT.
- do the pre-conditioning with the APU (Ref. TASK 12-33-21-618-001).
(2) On the AIR COND panel 30VU make sure that:
(a) the PACK FLOW selector is in the NORM position and,
(b) the PACK 1 and the PACK 2 pushbutton switches are in the on position (the OFF legend is off).
(3) Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 21-63-00Page 517 1201-299, 303-399, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 301-399,
Subtask 21-63-00-860-054-A
C. Aircraft Maintenance Configuration
(1) Pre-condition the Aircraft WARNING : MAKE SURE THAT THE FWD AVIONICS ACCESS DOOR 811 IS OPEN.
_______ WITH A WARNING PLACARD ATTACHED TO IT. THE WARNING NOTICE MUST TELL PERSONS NOT TO CLOSE THE DOOR. THIS PREVENTS ACCIDENTAL PRESSURIZATION OF THE AIRCRAFT.
-do the pre-conditioning with the APU (Ref. TASK 12-33-21-618-001).
(2)
On the AIR COND panel 30VU make sure that:
(a)
the ECON FLOW pushbutton switch is in the off position (the ON legend is off) and,
(b)
the PACK 1 and the PACK 2 pushbutton switches are in the on position (the OFF legends are off).
(3)
Do the EIS start procedure (Upper ECAM DU and lower ECAM DU only) (Ref. TASK 31-60-00-860-001).
**ON A/C ALL
4. Procedure
_________ **ON A/C 001-003, 051-054,
Subtask 21-63-00-720-050
A. Functional Test of the Temperature Control System (Test carried out with the APU bleed system)
WARNING : MAKE SURE THAT THERE ARE NO PERSONS OR EQUIPMENT NEAR THE RAM
_______ AIR OUTLET FLAPS. THE MOVEMENT OF THE RAM AIR OUTLET FLAPS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
(Ref. Fig. 501/TASK 21-63-00-991-001)
1EFF : ALL 1 21-63-00Page 518 1 1 Aug 01/05R 1 1 1CES 1
System Display Pages - Component Location Figure 501/TASK 21-63-00-991-001
R 1EFF : 1 1 1CES ALL 1 111 21-63-00 Page 519 Aug 01/05
NOTE : Make sure that the cabin doors and the cockpit windows are closed
____
when you do the test.
NOTE : Due to low pressure in the trim system, with fully closed trim air
____ valves the trim-air pressure regulating-valve symbol (6) can be indicated as closed and show amber. You must ignore this indication for the purposes of this test.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the ECAM control panel: On the System Display (SD):
- push the BLEED pushbutton - the BLEED page comes on,
switch. - the pack flow-control valves symbols
(1) move to the open positions and
show green.
2. On the AIR COND panel 30VU:
- put the COCKPIT, the FWD CABIN
and the AFT CABIN temperature
selectors to the mid (12
o'clock) position 24 deg.C.
3. On the ECAM control panel: On the SD:
- push the COND pushbutton - the COND page comes on.
switch.
4. Wait until the CKPT, the FWD and On the SD (COND page):
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM AIR CONDITIONING 空调 5(130)