• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-14 09:56来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 S 614-003

 (2)  
Drain and flush the waste tank (AMM 12-17-61/301).


 NOTE: Make sure the drain lines are fully drained.
____ Do not add the chemical precharge after you do the task to drain and flush the waste tanks.
 S 014-032
 (3)
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  P415 Panel 1) 415D35, UPR DK LAV FLUSH MOTOR U-21

 (4)  
At the service panel, open the cap to the applicable rinse fitting.

 (5)  
Gain access to the forward cargo compartment.

 S 014-034

 (6)  
Remove the floor panel above the ball valve in the area of stations 585 and RBL 5.


 S 014-033
 S 014-004
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. FREIGHTERS ú

 38-32-69
 ú ú 01 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

UPPER DECK LAVATORY
SEE A
TOILET DRAIN LINE
FORWARD CARGO COMPARTMENT
STA 580
RINSE 
LINE 
FWD 
OUTBD 
TOILET WASTE 
WASTE DRAIN  SERVICE PANEL 
VALVE ASSEMBLY 
INSTALLATION 
SEE  B 

Waste Drain Valve Assembly Installation
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. FREIGHTERS ú

 38-32-69
 ú ú 01 Page 402 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
K62010
A
747-400
MAINTENANCE MANUAL


(8 LOCATIONS)
WASTE DRAIN VALVE ASSEMBLY

Waste Drain Valve Assembly Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. FREIGHTERS ú

 38-32-69
 ú ú 01 Page 403 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
K62033
A
747-400
MAINTENANCE MANUAL

 S 024-006
 (7)  
Remove the clamp to disconnect the waste elbow tube from the drain valve assy.

 S 024-007

 (8)  
Remove the gask-o-seal between the waste elbow tube from the drain valve assy.

 S 024-008

 (9)  
Remove the bolts and washers from the drain valve assy.

 S 024-009

 (10)
 Remove the drain valve assy.

 S 024-010

 (11)
 Remove the heating gasket from the drain valve assembly or the waste tank service panel.(AMM 30-71-05/401)


 TASK 38-32-69-404-011
 3. Waste Drain Valve Installation (Fig. 401)
______________________________
 A. References
 (1)  
AMM 12-17-61/301, Waste Tank Servicing

 (2)  
AMM 30-71-05/401 Waste Tank Drain Fitting Gasket Heater


 B. Access
 (1)  
Location Zone 124 Area Below Forward Cargo Container Compartment, Right

 (2)  
Access Panels
 125A Waste Tank Service Panel

 

 C. Waste Drain Valve Installation
 S 414-031
 (1)  
Install heating gasket (AMM 30-71-05/401)

 S 424-012

 (2)  
Apply a fay surface seal with sealant, BMS5-95, Type I to both sides of the toilet drain gasket.

 (3)
Install the toilet drain gasket to the waste tank service panel.

 S 424-014

 (4)  
Apply a fay surface seal with sealant, BMS5-95, Type I to the drain valve assy.


 S 424-013
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. FREIGHTERS ú

 38-32-69
 ú ú 01 Page 404 ú Feb 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 气动系统 WATER/WASTE(74)