38-32-31
ALL ú ú 05 Page 406 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(4) S 864-042Push the drain valve in the down direction to keep the drain valve in the installed position.
(5) S 424-043Install the attach nuts and washers and tighten the attach nuts from 20 to 25 pound-inches.
(6) S 424-044Do the steps in Auxiliary Waste Tank Installation (AMM 38-32-51/401) to install the tank, do a leak test, and put the airplane back to the usual configuration.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
38-32-31
ALL ú ú 03 Page 407 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TOILET DRAIN VALVE - INSPECTION/CHECK
_____________________________________
TASK 38-32-31-206-004
1. Toilet Drain Valve Inspection_____________________________
A. General
(1)
The toilet drain valve supplies a positive seal in the toilet tank for different atmospheric pressures that occur during all altitude conditions.
(2)
This procedure has the instructions to open the drain cap to examine the drain tube at the service panel to make sure the toilet drain valve keeps the toilet fluid in the toilet tank.
(3)
If there is a fluid leak; a drain cap and a drain plug or a flapper valve in the service panel, and on some airplanes a ball valve in the forward drain tube, will hold the fluid in the drain tube. When you open the cap, you can do a visual check to make sure there is no leakage past the seal for the drain cap, the seal for the flapper valve, the drain plug, or the ball valve.
(4)
If you find indications of leakage from these components at the service panel, you must do the the corrective action to replace the parts that have leaks (AMM 38-32-00/501).
B. References
(1)
AMM 12-17-00/301, Toilet Servicing
(2)
AMM 38-32-00/501, Toilet System
C. Access
(1) Location Zone
113/114 Aft Lavatories
103 Forward Lavatory
D. Procedure
S 866-006
(1)
Do the steps in Toilet Servicing to service the toilet tank (AMM 12-17-00/301).
(2)
Fill the toilet tank with water until the toilet bowl is half full.
(3)
After one hour, open the drain cap, flapper valve or drain plug.
S 866-011
(4)
If the drain tube has a ball valve, do these steps:
S 866-007
S 866-009
(a) Disconnect the drain valve cable from the quick-disconnect on the toilet tank.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
38-32-31
ALL ú ú 01 Page 601 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
(b) At the service panel, operate the drain valve handle to open the ball valve.
(5) S 216-012Examine the inner surface of the drain tube for leakage from the toilet tank.
NOTE: If there is fluid in the toilet drain tube, it does not always mean there is leakage from the toilet drain valve. In some lavatories, there is a drain fitting installed under the toilet tank to drain the moisture condensation and lavatory spillage to the toilet drain tube.
(6) S 216-013If you find leakage in the drain tube from the toilet drain valve, do the steps under "If you find leakage in the drain tube", in the Toilet System - A/T procedure (AMM 38-32-00/501).
(7) S 866-014If the drain tube has a ball valve, connect the drain valve cable to the quick-disconnect on the toilet tank.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
38-32-31
ALL ú ú 01 Page 602 ú Mar 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 WATER AND WASTE(68)
