S 014-003
 (2)  
Remove the toilet tank shroud.
 (a)  Airplanes with the Rumbold or YRC modular lavatories: 1) Remove the fasteners (2 locations) that attach the flush handle with the face plate to the shroud.
 2)  Find the latch handle on the forward face of the shroud at the floor level. Turn the latch handle to disengage the catch which attaches the shroud to the toilet.
 3)  Pull the left latch handle away and inward to disengage the boss from the keyhole slot. 4) Lift the shroud off the support blocks, disengage the bottom from the floor pan, and remove the shroud.
 (b)  In ALL EXCEPT Rumbold, YRC, and Weber forward modular lavatory: 1) Remove the four attach screws from the shroud. 2) Remove the shroud from the lavatory.
 S 034-005
 (3)  
Disengage the control cable for the drain valve at the cable quick-disconnect.
 (4)  
Loosen the attach nuts for the drain valve.
 S 034-006
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 38-32-31
 ALL  ú ú 11 Page 401 ú Mar 15/96 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 737-300/400/500MAINTENANCE MANUAL 
REMOVE SCREW 
(4 LOCATIONS)
TOILET TANK SHROUD 2  TOILET BACK SHROUD  2  
VALVE TANK DRAIN ASEE  
FLUSH HANDLE  TIMER  
COLLAR  
TANK TOILET  CATCH BASIN (REF)  2  FASTENER  
(FORWARD TOILET SHOWN) INSTALLATION EXAMPLE  
SHROUD TOILET TANK  
2 1  SHROUD FOR RUMBOLD OR YRC Figure 401 (Sheet 1) Toilet Drain Valve Installation MODULAR LAVATORIES AIRPLANES WITH MODULAR LAVATORIES1 ALL EXCEPT AIRPLANES WITH MODULAR LAVATORIES
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 38-32-31
 ALL  ú ú 08 Page 402 ú Mar 15/96 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A 737-300/400/500MAINTENANCE MANUAL 
PULLEY BRACKET 
MOUNTING NUT (8 LOCATIONS) 
CONTROL CABLE 
CABLE QUICK- PULLY BRACKET 
DISCONNECT MOUNTING NUTS CABLE QUICK-
(8 LOCATIONS) 
DISCONNECT 
MOUNTING PLATE ASSEMBLY 
RUBBER 
BOOT 
GASKET BOTTOM TOILET TANK TOILET
LAVATORY MODULE 
TANK TOP
FLOOR 
TOILET TANK AIRPLANE 
DRAIN FLOOR 
ADAPTER 
O-RING SEAL 
VALVE SEAT RUBBER BOOT 
TOILET
TOILET TANK DRAIN VALVE 
TOILET TANK TANK CATCH BOTTOM BASIN
A1 
(REF) 
TOILET VALVE TANK DRAIN SEAT ADAPTER DRIP PAN 
TOILET TANK DRAIN VALVE 
A2 
Toilet Drain Valve Installation 
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 38-32-31
 ALL  ú ú 15 Page 403 ú Jul 15/92 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A57848
A 
737-300/400/500MAINTENANCE MANUAL
 S 034-007
 (5)  
Push the drain valve in the down direction to control the effect of the spring.
S 034-008
 (6)  
Remove the attach nuts and washers (8 locations) for the drain valve.
 S 024-018
 WARNING: WEAR GLOVES AND A PREVENTIVE COVER WHEN YOU WORK WITH PARTS
_______
 INSIDE THE TANK TO HELP PREVENT INJURY.
 (7)  Remove the drain valve and the gasket.
 TASK 38-32-31-404-019
 3. Install Toilet Drain Valve (Fig. 401)
__________________________
 A. References
 (1)  AMM 12-17-00/301, Toilet Servicing
 B. Access
 (1)  Location Zones
 103 Forward Lavatory
 118/113 Aft Left Lavatory
 114 Aft Right Lavatory
 C. Procedure
 S 144-020
 (1)  Clean the drain valve seat.
 NOTE: Make sure the valve seat is smooth, has no unwanted material,
____
 has no scratches, or other damage.
 S 424-021
 (2)  Install the drain valve for the toilet.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300 400 500 AMM 飞机维护手册 WATER AND WASTE(66)