737-300 400 500 AMM 飞机维护手册 防冰和排雨(13)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

A
737-300/400/500MAINTENANCE MANUAL
 (d)  NOSE GEAR AIR/GND
 S 715-006
 (3)  Momentarily push the L VALVE OPEN and the R VALVE OPEN lights on the P5-11 panel.
 NOTE: Each light will come on, then go off.
____
 S 865-033
 (4)  
Make sure the thrust levers are in the IDLE position.

 S 865-007

 (5)  
Remove the access panels to get to the wing TAI valves.
 (AMM 12-30-00/201)

 

 E. Procedure
 S 725-008
 (1)  Do a test of the TAI indication.
 (a)  
Put the WING ANTI-ICE switch in the ON position.

 (b)  
Make sure the L VALVE OPEN and R VALVE OPEN lights come on brightly for 1 to 3 seconds.

 (c)  
Make sure the L VALVE OPEN and R VALVE OPEN lights are on dimly after 3 seconds.

 (d)  
Make sure the wing TAI valves open.

 (e)  
Disconnect the D732 electrical connector from the left wing TAI valve.

 (f)  
Make sure the L VALVE OPEN light is on brightly and continuously.

 (g)  
Connect the D732 electrical connector to the left wing TAI valve.

 (h)  
Make sure the L VALVE OPEN light is on dimly and continuously.

 (i)  
Disconnect the D734 electrical connector from the right wing TAI valve.

 (j)  
Make sure the R VALVE OPEN light is on brightly and continuously.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 30-11-00
 ALL  ú ú 03 Page 505 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (k)  
Connect the D734 electrical connector to the right wing TAI valve.

 (l)  
Make sure the R VALVE OPEN light is on dimly and continuously.

 (m)  
Put the WING ANTI-ICE switch in the OFF position.

 (n)  
Make sure the L VALVE OPEN and R VALVE OPEN lights come on brightly for 1 to 3 seconds.

 (o)  
Make sure the L VALVE OPEN and R VALVE OPEN lights go off.

 (p)  
Make sure the wing TAI valves close.

 S 715-009
 (2)  Make sure the thermal switches operate correctly.
 (a)  
Remove the thermal switch from the TAI duct in the left wing (AMM 30-11-21/401).

 (b)  
Connect the D738 electrical connector to the thermal switch.

 (c)  
Put the WING ANTI-ICE switch in the ON position.

 (d)  
Use the special tool to increase the temperature of the thermal switch until it is from 125 to 135 degrees C.

 (e)  
See that the L VALVE OPEN and the R VALVE OPEN lights come on brightly and continuously.

 (f)  
See that the TAI valves in each wing are closed.

 (g)  
Let the thermal switch become cool.

 (h)  
When the thermal switch is cool, monitor the TAI valves and lights. 1) See that the L VALVE OPEN and the R VALVE OPEN lights are

 on dimly. 2) See that the TAI valve in each wing is open.

 (i)  
Put the WING ANTI-ICE switch in the OFF position.

 (j)  
Install the thermal switch in the TAI duct in the left wing (AMM 30-11-21/401).

 (k)  
Remove the thermal switch from the TAI duct in the right wing (AMM 30-11-21/401).

 (l)  
Connect the D736 electrical connector to the thermal switch.

 (m)  
Put the WING ANTI-ICE switch in the ON position.

 (n)  
Use the special tool to increase the temperature of the thermal switch until it is from 125 to 135 degrees C.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 30-11-00
 ALL  ú ú 02 Page 506 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 
737-300/400/500MAINTENANCE MANUAL
 (o) See that the L VALVE OPEN and the R VALVE OPEN lights come on
 brightly and continuously.
 (p) See that the TAI valves in each wing are closed.
 (q) Let the thermal switch become cool.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 防冰和排雨(13)