_______
-
IN YOUR MOUTH
-
IN YOUR EYES
-ON YOUR SKIN FOR A LONG TIME.
AIRCRAFT FUEL IS POISONOUS.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________ Self Explanatory
2. Job Set-up Information______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
28-00-00-910-001 Fuel Safety Procedures 28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-25-00-650-001 Pressure Defuel 28-25-00-869-001 Fuel Transfer 57-17-11-000-001 Removal of the Covers 147AZ (148AZ) 57-17-11-991-002 Fig. 402
3. Job Set-up
__________ Subtask 57-17-11-010-051
A. Get Access
(1) Remove the access covers 147AZ, 148AZ (Ref. TASK 57-17-11-000-001).
Subtask 57-17-11-860-050
B. Aircraft Maintenance Configuration
(1)
Obey the fuel safety procedures (Ref. TASK 28-00-00-910-001), (Ref. TASK 28-10-00-910-001).
(2)
Defuel the applicable inner wing tank (Ref. TASK 28-25-00-650-001) or transfer the fuel of the applicable inner wing tank (Ref. TASK 28-25-00-869-001).
4. Procedure
_________ Subtask 57-17-11-020-051
A. Removal of the Access Door
(Ref. Fig. 402/TASK 57-17-11-991-002)
(1) Remove the bolts (11), (18), (16) and the washers (12), (17), (15) from the access door (13).
NOTE : Hold the access door (13) when you remove the fasteners.
____
(2)
Remove the access door (13).
(3)
Remove and discard the seal (14).
Access Door at RIB1
Figure 402/TASK 57-17-11-991-002
1EFF : ALL 1 57-17-11 Page 412
1 1 Feb 01/98
1 1
1CES 1
TASK 57-17-11-400-002
Installation of the Access Door at RIB1
WARNING : MAKE SURE THAT YOU HAVE THE CORRECT FIRE FIGHTING EQUIPMENT
_______
AVAILABLE.
WARNING : OBEY THE SAFETY PROCEDURES WHEN YOU DO WORK IN A FUEL TANK.
_______
WARNING : DO NOT GET AIRCRAFT FUEL:
_______
-
IN YOUR MOUTH
-
IN YOUR EYES
-ON YOUR SKIN FOR A LONG TIME.
AIRCRAFT FUEL IS POISONOUS.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint free cloth R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft)
No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 09-026 C Z-16.403
FLUOROSILICONE SEALANT (Ref. 20-31-00)
Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
12 seal 57-17-05 02 -080
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-11-28-650-003 Pressure Refuel with Automatic Control R 20-28-00-912-002 Electrical Bonding of Components With Conductive R Bolts and Screws in the Tanks
28-00-00-910-001 Fuel Safety Procedures 28-10-00-910-001 Safety Procedures When You Do Work in a Fuel Tank 28-25-00-650-001 Pressure Defuel 28-25-00-869-001 Fuel Transfer 57-17-11-000-001 Removal of the Covers 147AZ (148AZ) 57-17-11-400-001 Installation of the Covers 147AZ (148AZ) 57-17-11-991-002 Fig. 402
3. Job Set-up
__________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM WINGS 机翼1(68)
