• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 12:37来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS.

_______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
 (1)
 Apply masking tape BONDING AND ADHESIVE COMPOUNDS (Material No. 08-074) or masking paper on the equipment and fittings adjacent to the area.

 (2)
 Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspected area.

 (3)
 Remove the masking paper or the masking tape.


 5. Close-up
________ Subtask 57-10-00-410-073
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the wing-to-fuselage fairings: 191CT, 191LB, 192CT and 192LB (Ref. TASK 53-35-11-400-001).

 (3)
 Install the quick-release access panels: 191BB, 191EB, 192EB, 192FB, 195BB and 196BB (Ref. TASK 53-35-13-400-002).

 (4)
 Remove the access platform(s).

 (5)
 Close the main landing-gear doors (Ref. TASK 32-12-00-410-001).


 1EFF : ALL 1 57-10-00Page 658 1 1 May 01/05R 1 1 1CES 1


 TASK 57-10-00-200-020
 Detailed Inspection of Center Wing Box, Front Spar, Forward Face
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 571156-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific access platform 2 m (6 ft. 7 in.)
 No specific 1 FLASHLIGHT

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
25-80-00-000-001 Removal of the Insulation Blankets 25-80-00-400-001 Installation of the Insulation Blankets 52-30-00-860-003 Open the FWD or AFT Cargo-Compartment Door with the
 Hand Pump 52-30-00-860-004 Close the FWD or AFT Cargo-Compartment Door with the
 Hand Pump
 SRM 511100-P.Block001
 SRM 512200-P.Block001

R 57-10-00-991-020 Fig. 613 3. Job Set-up


__________ Subtask 57-10-00-010-076
 A. Get Access
 (1)
 Put an access platform in position at the FWD cargo-compartment door

 825.

 (2)
 Open the FWD cargo-compartment door 825
 (Ref. TASK 52-30-00-860-003).


 (3)
 Remove the FWD cargo-compartment linings.

 (4)
 Remove the insulation blankets (Ref. TASK 25-80-00-000-001).


 (5) Use a FLASHLIGHT for the inspection. Subtask 57-10-00-110-060
 B. Cleaning of the Structure
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL

_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 (1) Clean the inspection surface with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
 1EFF : ALL 1 57-10-00Page 660 1 1 May 01/05R 1 1 1CES 1


 4. Procedure
_________
 Subtask 57-10-00-220-060

 A. Inspection R (Ref. Fig. 613/TASK 57-10-00-991-020)
 (1)
 Do a detailed inspection of the forward face of the front spar of the center wing box.

 (2)
 Make sure that there is no:

 (a)
 Corrosion damage:

 -If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200-P.Block001) for types, inspection, removal and corrosion protection.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM WINGS 机翼1(54)