(2)
Remove the nut (10), the bolt (8) and the bushes (9).
(3)
Remove and discard the cotter pin (12) and (18)
(4)
Remove the locking cup (17) the nut (16) and the washer (19).
(5)
Remove the hinge bolt (14).
(6)
Remove the elevator support strut (1).
(7)
Remove the bush (15) from the elevator support strut end (1).
Elevator Support Strut Figure 401/TASK 55-16-48-991-001-A
R 1EFF : 001-049, 052-099, 101-149, 151-199, 1 55-16-48Page 405 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R Elevator Support Strut
R Figure 401A/TASK 55-16-48-991-001
R 1EFF : 051-051, 1 55-16-48 Page 406
1 1 May 01/05
1 1
1CES 1
R **ON A/C 051-051,
R Subtask 55-16-48-020-051
R A. Removal of Support Struts
R (1) Remove and discard the cotter pin (7).
R (2) Use TOOL - REMOVAL, WASHERS SL40871 to remove the locking ring (11)
R and the nut (10) (Ref. TASK 20-22-00-000-001)
R (3) Remove the bolt (8) and the bushes (9).
R (4) Remove and discard the cotter pin (12).
R (5) Use WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 and TOOL -
R EXTRACTION, TAB WASHERS STA-LOK NSA5454 to remove the locking ring
R (17) and the nut (16) (Ref. TASK 20-22-00-000-001).
R (6) Remove the washer (19) and the hinge bolt (14).
R (7) Remove the elevator support strut (1).
R (8) Remove the bush (15) from the elevator support strut end (1).
R **ON A/C ALL
Subtask 55-16-48-020-052
B. Removal of the Elevator Support Strut Bearing
(1) Remove and discard the cotter pin (20).
(2) Remove the nut (22)
(3) Remove the support strut bearing (21).
TASK 55-16-48-400-001
Installation of the Elevator Support Struts WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR.
_______ MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
WARNING : DO NOT GET THE COMPOUND ON YOUR SKIN.
_______ IF YOU DO:
-RUB IT OFF IMMEDIATELY WITH A CLEAN CLOTH
-WASH THE SKIN WITH SOAP AND RINSE WITH CLEAN WATER. CAUTION : DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE MADE OF
_______ CARBONFIBER REINFORCED PLASTIC.
1. Reason for the Job__________________ Self Explanatory
1EFF : ALL 1 55-16-48Page 408 1 1 May 01/05R 1 1 1CES 1
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R R R R R R No specific No specific No specific SL90-313-3750 SL90-315-3750 SL90-626-3125 98D27309005000 98D27309009000 98D27903500000 Torque Wrench : range 0.00 to 1.20 m.daN (0.00 to 9.00 lbf.ft)Torque Wrench : range 0.20 to 3.60 m.daN (2.00 to 26.00 lbf.ft)Torque Wrench : range 1.00 to 10.00 m.daN (8.00 to 75.00 lbf.ft) 1 TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 1 TOOL - INSTALLATION, WASHERS SL40871 1 TBD 1 COLLAR-ELEVATOR SERVO CONTROL SAFETY4 PIN-SIDE STICK LOCKING
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-001 Material No. 11-008 F AIR-4205 WHEEL BEARING MINERAL GREASE (Ref. 20-31-00) (USE 11-008A) (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
R 7 7 12 18 20 cotter pin cotter pin cotter pin cotter pin cotter pin 55-16-48 01 -06055-16-48 01 -060A55-16-48 01 -03027-34-07 26A-03055-16-48 01 -090
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM STABILIZERS 安定面(52)