A320飞机维护手册 AMM STABILIZERS 安定面(44)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  Subtask 55-16-34-010-053 
R  B. Access 
R  (1) Put the access platform in position at zone 312. 
R  (2) Open the access door 312AR. 
R  (3) Remove the horizontal stabilizer (THS) actuator (9CE). (Ref. TASK 27-
R  44-51-000-001) 
R  (4) Remove the THS actuator arms attach fittings. (Ref. TASK 55-16-34-
R  000-001). 
R  4. Procedure_________ 
R  (Ref. Fig. 602/TASK 55-16-34-991-003) 
R  Subtask 55-16-34-220-050 
R  A. Fits and Clearances 
R  (1) Complete an inspection of these dimensions,

 

R In Service Wear Limits - THS Actuator Arm Attach Fittings R Figure 602/TASK 55-16-34-991-003
 1EFF : ALL 1 55-16-34Page 608 1 1 Aug 01/02 1 1 1CES 1

R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | CC | 62.771 | 62.790 | | | 62.736 | | | 
R  | OD 2 |(2.4713) |(2.4720) | | |(2.4699) | | | 
R  | | | | 0.010 | 0.059 | | | 0.128 | 
R  | | | | (0.0003)| (0.0023)| | |(0.0050)| 
R  | CC | 62.800 | 62.830 | | | | 62.864 | | 
R  | ID 1 |(2.4724) |(2.4736) | | | |(2.4749) | | 
R  -------------------------------------------------------------------------------
R  Subtask 55-16-34-220-051 
R  B. Fits and Clearances 
R  (1) Complete an inspection of these dimensions, 
R  -------------------------------------------------------------------------------
R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | 
R  | DETAIL |---------------------------------------|----------------------------| 
R  | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | 
R  | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | 
R  | NO. |-------------------|-------------------|---------|---------| CLEAR. | 
R  | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| 
R  |--------|---------|---------|---------|---------|---------|---------|--------| 
R  | CC | 50.787 | 50.800 | | | 50.775 | | | 
R  | OD 3 |(1.9994) |(2.0000) | | |(1.9990) | | | 
R  | | | | -0.002 | 0.024 | | | 0.048 | 
R  | | | |-(0.0000*| (0.0009*| | |(0.0018*| 
R  | CC | 50.798 | 50.811 | | | | 50.823 | | 
R  | ID 2 |(1.9999) |(2.0004) | | | |(2.0009) | | 
R  ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED ********** 
R  Subtask 55-16-34-220-052 
R  C. Fits and Clearances 
R  (1) Complete an inspection of these dimensions,

 

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | CC | 65.971 | 65.990 | | | 65.936 | | | | OD 4 |(2.5972) |(2.5980) | | |(2.5959) | | | | | | | 0.010 | 0.059 | | | 0.128 | | | | | (0.0003)| (0.0023)| | |(0.0050)| | CC | 66.000 | 66.030 | | | | 66.064 | | | ID 5 |(2.5984) |(2.5996) | | | |(2.6009) | | -------------------------------------------------------------------------------
Subtask 55-16-34-220-053
 D. Fits and Clearances
 (1) Complete an inspection of these dimensions,
 -------------------------------------------------------------------------------
R R R R R R R  | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | CC | 50.787 | 50.800 | | | 50.775 | | | | OD 3 |(1.9994) |(2.0000) | | |(1.9990) | | | | | | | -0.002 | 0.024 | | | 0.048 | | | | |-(0.0000*| (0.0009*| | |(0.0018*| | CC | 50.798 | 50.811 | | | | 50.823 | | | ID 4 |(1.9999) |(2.0004) | | | |(2.0009) | | ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED **********
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM STABILIZERS 安定面(44)