• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:55来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (GTCP 36-300) 49-11-11-000-003 Removal of the Power Plant (APU) (APS 3200) 51-00-00-615-002 Aircraft Cleaning after a Hydraulic Fluid Leakage 53-53-11-000-001 Removal of the Horizontal Support Struts between
 STA3531/FR74 and STA3655/FR77 53-56-11-000-001 Removal of the Support Fittings of the Trimmable
 Horizontal Stabilizer (THS)
 53-58-11-000-006 Removal of the Fuselage Tail Cone
 55-15-11-000-001 Removal of the Apron 333AT/333AB/343AT/343AB
 55-10-11-991-001 Fig. 401
 55-10-11-991-002 Fig. 402
 55-10-11-991-003 Fig. 403
 55-10-11-991-004 Fig. 404


 3. Job Set-up
__________

 Subtask 55-10-11-860-052
 A. Aircraft Maintenance Configuration
 (1) Make sure that the trimmable horizontal stabilizer is set to the neutral position.
 Subtask 55-10-11-860-050
 B. Depressurize Hydraulic Systems
 (1) Depressurize the Green, Yellow and Blue hydraulic systems (Ref. TASK 29-10-00-864-001) (Ref. TASK 29-10-00-864-002) (Ref. TASK 29-10-00-864-003).
 Subtask 55-10-11-865-050
 C. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
 Subtask 55-10-11-481-050
 D. Install Locking Devices
 (1) Put the PIN-SIDE STICK LOCKING (98D27903500000) in the CAPT and F/O side stick controllers.
 Subtask 55-10-11-941-050
 E. Safety Precautions
 (1)
 Put the warning notices in the flight compartment to tell persons not to operate the flight controls.

 (2)
 Put the warning notices in position to tell persons not to operate the hydraulic systems.

 (3)
 Put the variable access platform in position at zones 311/312 and 330/340.


 1EFF : ALL 1 55-10-11Page 403 1 1 Aug 01/02R 1 1 1CES 1


 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,

 Subtask 55-10-11-020-050
 F. Remove Related Items
 (1)
 Remove the 35D55182822000 from the hoisting points.

 (2)
 Install the NSA 9006-12B hoisting lugs.

 (3)
 Remove the APU (Ref. TASK 49-11-11-000-001).

 (4)
 Remove the tail cone (Ref. TASK 53-58-11-000-006).


 (5) Remove the THS aprons (Ref. TASK 55-15-11-000-001). R **ON A/C 106-149, 211-299, 301-399, 401-499,
 Subtask 55-10-11-020-050-A
 F. Remove Related Items
 (1)
 Remove the 35D55182822000 from the hoisting points.

 (2)
 Install the NSA 9006-12B hoisting lugs.

 (3)
 Remove the APU (Ref. TASK 49-11-11-000-003).

 (4)
 Remove the tail cone (Ref. TASK 53-58-11-000-006).


 (5) Remove the THS aprons (Ref. TASK 55-15-11-000-001).
 **ON A/C ALL

 Subtask 55-10-11-941-051
 G. Attach Support Equipment
 (1) Put the crane with the SLING-THS (98D55109005000) in position and attach the cables to the hoisting lugs.


 4. Procedure
_________ (Ref. Fig. 401/TASK 55-10-11-991-001, 402/TASK 55-10-11-991-002, 403/TASK 55-10-11-991-003, 404/TASK 55-10-11-991-004) Subtask 55-10-11-020-051
 A. Disconnect Electrical Connectors.
 (1)
 Remove the bolts (11), the washers (12), the spacers (14),the clamps

 (13) and the nuts (15) and disconnect the electrical connectors 7114VC-A (1), 7432 VC-A (2), 7144VC-A (3), 7104VC-A (4) and 7146 VC-A (5).

 (2)
 Remove the bolts (11), the washers (12), the spacers (14), the clamps

 (13) and the nuts (15) and disconnect the electrical connectors 7137VC-A (10), 7433VC-A (9), 7105VC-A (8), 7131VC-A (7) and 7133VC-A (6).

 (3)
 Put electrical blanking caps and plugs on the disconnected electrical connectors and receptacles.


 Subtask 55-10-11-020-052
 B. Disconnect Bonding Connections.
 (1) Remove the nuts (28), the bolts (25) and the washers (26).
 (2) Disconnect the bonding leads (27). Subtask 55-10-11-020-053
 C. Disconnect Hydraulic Systems. WARNING : DO NOT GET HYDRAULIC FLUID ON YOUR SKIN, IN YOUR EYES OR IN
_______ YOUR MOUTH. HYDRAULIC FLUID IS POISONOUS AND CAN GO THROUGH YOUR SKIN AND INTO YOUR BODY. FLUSH HYDRAULIC FLUID FROM YOUR EYES, MOUTH OR SKIN WITH WATER. GET MEDICAL AID IF YOU GET HYDRAULIC FLUID IN YOUR EYES OR MOUTH.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM STABILIZERS 安定面(12)