• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 08:55来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING_______ NOTICES ARE IN POSITION.
 (1) Depressurize the Green, Yellow and Blue hydraulic systems (Ref. TASK 29-00-00-864-001).
 (2) Put the warning notices in the cockpit to tell persons not to operate the flight controls.

 

 Subtask 55-40-00-865-058

 B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08 49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 105VU FLT CTL/SEC1/STBY SPLY 22CE B01 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18 121VU FLIGHT CONTROLS/SEC3/SPLY 21CE3 Q19 121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20
 Subtask 55-40-00-010-052
 C. Get Access
R (1) Put the adjustable access platform in position at Zone 320.
 (2) Open and safety the access panels 325BL, 325CL (Ref. TASK 55-33-13-010-002).
 Subtask 55-40-00-110-050
 D. Cleaning
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE SPECIAL
_______
 MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-002) and a lint-free cloth.
 4. Procedure
_________
 (Ref. Fig. 602/TASK 55-40-00-991-002)
 Subtask 55-40-00-210-053
 A. Inspection
 (1) Do a detailed visual inspection of the rudder attach fittings 1, 2, 3, 4 and 5 and the rudder actuator fittings actuator 1, 2 and 3.
 NOTE : If you find damage, refer to (Ref. ASRM 55-46-00-101).
____
 5. Close-up
________
 Subtask 55-40-00-916-050
 A. Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.
 Subtask 55-40-00-410-053
 B. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) Close the access panels 325BL, 325CL (Ref. TASK 55-33-13-410-002).
 (3)
 Remove the access platform(s).

 (4)
 Remove the warning notice(s).

 


 Rudder Attach Fittings 1 thru 5 and Actuator Attach Fittings 1, 2 and 3 Figure 602/TASK 55-40-00-991-002
 1EFF : ALL 1 55-40-00Page 615 1 1 Aug 01/99R 1 1 1CES 1


 (5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
 Subtask 55-40-00-865-059
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 5CC1, 5CC2, 14CC1, 14CC2, 15CC, 15CE1, 15CE2, 16CE1, 16CE2, 19CE1, 19CE2, 19CE3, 22CE, 21CE1, 21CE2, 21CE3, 22CE, 21CE1, 21CE2, 21CE3
 1EFF : ALL 1 55-40-00Page 616 1 1 Aug 01/99R 1 1 1CES 1

 TASK 55-40-00-210-005


R Detailed Visual Inspection of the Rudder Attach Fittings 6 and 7
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 554006-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific lint-free cloth
 No specific warning notices
 No specific adjustable access platform 12 m (39 ft. 4 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002  USA MIL-PRF-680
 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
 (Ref. 20-31-00)

 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM STABILIZERS 安定面(108)